Few days ago I started to get the following message from updater Updater selhal: Failed to provide the approval report: Read-only file system
Restart didnt help, reset or reflash I didnt tried yet, I want to know why the problem happen first.
The whole flash file system is opened as Read-Only, It looks like some problem with BTRFS.
DMESG:
[ 138.880677] br-lan: port 1(eth0) entered forwarding state
[ 138.900680] br-lan: port 2(eth2) entered forwarding state
[ 138.991562] mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 138.991586] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 139.260631] br-lan: port 3(wlan0) entered forwarding state
[ 145.140677] device br-lan entered promiscuous mode
[ 148.814178] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
...
[ 164.377722] BTRFS warning (device mmcblk0p1): csum failed ino 645559 off 258048 csum 3384479709 expected csum 1807326239
...
[ 230.139754] Custom GPIO-based W1 driver version 0.1.1
...
[ 230.520912] br-lan: port 3(wlan0) entered disabled state
[ 230.520972] br-lan: port 2(eth2) entered disabled state
[ 230.520990] br-lan: port 1(eth0) entered disabled state
[ 230.533351] device eth0 left promiscuous mode
[ 230.533409] br-lan: port 1(eth0) entered disabled state
[ 230.544478] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 230.546511] device eth2 left promiscuous mode
[ 230.546580] br-lan: port 2(eth2) entered disabled state
[ 230.558918] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 230.562342] device wlan0 left promiscuous mode
[ 230.562395] br-lan: port 3(wlan0) entered disabled state
[ 230.563144] device br-lan left promiscuous mode
[ 230.600804] device eth0 entered promiscuous mode
[ 230.606689] device eth2 entered promiscuous mode
[ 230.607783] device wlan0 entered promiscuous mode
[ 230.610033] br-lan: port 3(wlan0) entered forwarding state
[ 230.610072] br-lan: port 3(wlan0) entered forwarding state
[ 230.610088] br-lan: port 2(eth2) entered forwarding state
[ 230.610100] br-lan: port 2(eth2) entered forwarding state
[ 230.610113] br-lan: port 1(eth0) entered forwarding state
[ 230.610125] br-lan: port 1(eth0) entered forwarding state
[ 231.281720] device wlan0 left promiscuous mode
[ 231.281774] br-lan: port 3(wlan0) entered disabled state
[ 231.523948] br-lan: port 1(eth0) entered disabled state
[ 231.524186] br-lan: port 2(eth2) entered disabled state
[ 231.594327] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 231.597394] device wlan0 entered promiscuous mode
[ 231.597449] br-lan: port 3(wlan0) entered forwarding state
[ 231.597474] br-lan: port 3(wlan0) entered forwarding state
[ 231.676023] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 232.590694] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 232.590756] br-lan: port 1(eth0) entered forwarding state
[ 232.590810] br-lan: port 1(eth0) entered forwarding state
[ 232.600773] mvneta f1070000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
[ 232.600829] br-lan: port 2(eth2) entered forwarding state
[ 232.600879] br-lan: port 2(eth2) entered forwarding state
[ 233.590659] br-lan: port 3(wlan0) entered forwarding state
[ 234.590652] br-lan: port 1(eth0) entered forwarding state
[ 234.600665] br-lan: port 2(eth2) entered forwarding state
[ 237.286637] BTRFS warning (device mmcblk0p1): mmcblk0p1 checksum verify failed on 1515323392 wanted F2E910BE found A1B863F level 0
[ 237.290191] BTRFS warning (device mmcblk0p1): mmcblk0p1 checksum verify failed on 1515323392 wanted F2E910BE found 9A26D119 level 0
[ 237.290218] BTRFS warning (device mmcblk0p1): Skipping commit of aborted transaction.
[ 237.290223] ------------[ cut here ]------------
[ 237.290233] WARNING: CPU: 0 PID: 453 at fs/btrfs/transaction.c:1840 btrfs_commit_transaction+0xa80/0xbd8()
[ 237.290236] BTRFS: Transaction aborted (error -5)
[ 237.290238] Modules linked in: w1_gpio_custom qcserial option iptable_nat ip6table_nat dvb_usb_af9035 ath9k w1_therm w1_gpio usb_wwan snd_usb_audio rndis_host qmi_wwan pppoe nf_nat_pptp nf_nat_ipv6 nf_nat_ipv4 nf_nat_amanda nf_conntrack_pptp nf_conntrack_ipv6 nf_conntrack_ipv4 nf_conntrack_amanda ipt_REJECT ipt_MASQUERADE ftdi_sio ebtable_nat ebtable_filter ebtable_broute dvb_usb_v2 dvb_usb_dib0700 dvb_usb dib9000 dib8000 dib7000p dib7000m dib3000mc cdc_ether ath9k_common armada_thermal xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_socket xt_recent xt_nfacct xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TPROXY xt_TCPMSS xt_REDIRECT xt_NFQUEUE xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY wire usbserial usbnet usbip_host usbip_core ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda tua9001 ts_kmp ts_fsm ts_bm thermal_sys tda18218 snd_usbmidi_lib rc_core pppox ppp_mppe ppp_async nfnetlink_queue nfnetlink_acct nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_nat_h323 nf_nat_ftp nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast mxl5007t mvsdio macvlan it913x iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables hwmon fc2580 fc0013 fc0012 fc0011 ebtables ebt_vlan ebt_stp ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_among ebt_802_3 dvb_core dibx000_common dib0090 dib0070 crc_ccitt cdc_wdm ath9k_hw af9033 fuse sch_teql sch_tbf sch_sfq sch_red sch_prio sch_pie sch_netem sch_htb sch_gred sch_fq sch_dsmark sch_codel em_text em_nbyte em_meta em_cmp cls_basic act_vlan act_police act_pedit act_nat act_ipt act_gact act_csum act_bpf act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress v4l2_common videodev ath10k_pci ath10k_core ath mac80211 cfg80211 compat ledtrig_usbdev ledtrig_oneshot xt_LED ledtrig_morse ledtrig_heartbeat ledtrig_gpio cryptodev xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat nf_conntrack ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_raw ip6table_mangle ip6table_filter ip6_tables pppoatm ppp_generic slhc nfsd nfsv3 nfs msdos ip_gre gre ifb sit ip6_tunnel tunnel6 tunnel4 ip_tunnel veth tun snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore rxkad loop vfat fat udf crc_itu_t ntfs lockd sunrpc grace minix isofs hfsplus hfs cramfs configfs cifs autofs4 kafs af_rxrpc dns_resolver dm_crypt dm_mirror dm_region_hash dm_log dm_mod br2684 atm multipath fscache raid456 async_raid6_recov async_pq async_xor async_memcpy async_tx raid10 raid1 raid0 linear md_mod xt_NFLOG x_tables nfnetlink_log nfnetlink nls_utf8 nls_koi8_r nls_cp1255 nls_iso8859_6 nls_iso8859_2 nls_iso8859_15 nls_iso8859_13 nls_iso8859_1 nls_cp932 nls_cp866 nls_cp864 nls_cp862 nls_cp852 nls_cp850 nls_cp775 nls_cp437 nls_cp1251 nls_cp1250 regmap_spi regmap_mmio regmap_i2c xts algif_skcipher algif_hash af_alg sha512_generic sha256_generic sha1_generic seqiv jitterentropy_rng drbg pcbc md5 md4 marvell_cesa hmac gf128mul fcrypt ecb des_generic ctr cmac ccm cbc authenc usb_storage xhci_plat_hcd xhci_pci xhci_hcd orion_wdt uhci_hcd ohci_platform ohci_hcd ledtrig_transient ahci_mvebu sata_mv ahci ehci_orion ehci_platform ehci_hcd sd_mod ahci_platform libahci_platform libahci libata scsi_mod xfs libcrc32c jfs f2fs exfat usbcore nls_base usb_common mii aead crypto_null
[ 237.290740] CPU: 0 PID: 453 Comm: btrfs-transacti Not tainted 4.4.74-967673b9d511e4292e3bcb76c9e064bc-0 #1
[ 237.290744] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 237.290747] Backtrace:
[ 237.290759] [<c001c66c>] (dump_backtrace) from [<c001c85c>] (show_stack+0x18/0x1c)
[ 237.290768] r6:00000000 r5:60000013 r4:c06c02a4 r3:00000000
[ 237.290796] [<c001c844>] (show_stack) from [<c02f1120>] (dump_stack+0x98/0xac)
[ 237.290806] [<c02f1088>] (dump_stack) from [<c00292dc>] (warn_slowpath_common+0x8c/0xbc)
[ 237.290812] r6:00000730 r5:c022a3e8 r4:ee093e98 r3:c06b8de8
[ 237.290825] [<c0029250>] (warn_slowpath_common) from [<c0029344>] (warn_slowpath_fmt+0x38/0x40)
[ 237.290827] r8:ee093ed4 r7:eea71400 r6:ee45ef30 r5:ee42de70 r4:ee45fcd0
[ 237.290840] [<c0029310>] (warn_slowpath_fmt) from [<c022a3e8>] (btrfs_commit_transaction+0xa80/0xbd8)
[ 237.290842] r3:fffffffb r2:c05dfe78
[ 237.290850] [<c0229968>] (btrfs_commit_transaction) from [<c0224e68>] (transaction_kthread+0x1a8/0x218)
[ 237.290853] r10:00000000 r9:00000000 r8:001f0d65 r7:ee092000 r6:000001f4 r5:000005c0
[ 237.290861] r4:eea71400
[ 237.290868] [<c0224cc0>] (transaction_kthread) from [<c0043c94>] (kthread+0x110/0x124)
[ 237.290871] r10:00000000 r9:00000000 r8:00000000 r7:c0224cc0 r6:eea71400 r5:00000000
[ 237.290879] r4:eeb34c40
[ 237.290885] [<c0043b84>] (kthread) from [<c0009db8>] (ret_from_fork+0x14/0x3c)
[ 237.290888] r7:00000000 r6:00000000 r5:c0043b84 r4:eeb34c40
[ 237.290895] ---[ end trace c237b50c35d888b5 ]---
[ 237.290907] BTRFS: error (device mmcblk0p1) in cleanup_transaction:1840: errno=-5 IO failure
[ 237.292286] BTRFS: error (device mmcblk0p1) in btrfs_drop_snapshot:8807: errno=-5 IO failure
[ 237.292290] BTRFS info (device mmcblk0p1): forced readonly
[ 237.307887] BTRFS info (device mmcblk0p1): delayed_refs has NO entry
[ 237.333051] device vethKN0H9G entered promiscuous mode
[ 237.333402] IPv6: ADDRCONF(NETDEV_UP): vethKN0H9G: link is not ready
[ 237.563926] eth0: renamed from vethD943S4
[ 237.592481] IPv6: ADDRCONF(NETDEV_CHANGE): vethKN0H9G: link becomes ready
[ 237.592571] br-lan: port 4(vethKN0H9G) entered forwarding state
[ 237.592611] br-lan: port 4(vethKN0H9G) entered forwarding state
[ 237.742569] svc: failed to register lockdv1 RPC service (errno 97).
[ 239.590686] br-lan: port 4(vethKN0H9G) entered forwarding state
...
[ 293.311055] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
...
[ 414.187490] BTRFS warning (device mmcblk0p1): csum failed ino 427564 off 458752 csum 74238440 expected csum 3120347944
Any idea how to repair it? As I understand I cannot work with FS until its mounted.
So far I have tried this command btrfs check /deb/mmcblk0p1with no success, mounted aborting…
@vcunat (cau Vlado). The problem is, that the FS is mounted, so the btrfs check will not run. Maybe the last-resort restart option “5 LEDs or more: Boot to rescue shell”? If the main FS can be accessed via the rescue shell, it could be done…
The question is, as I ask in my thread (Error opening journal: Read-only file system), is this a memory problem? Is is worn out? Is it good idea to run LXC with simple web accessed mainly by bots and just a few humans there? Should be the LXC webserver moved out to SSD (how)? These are questions that bothers me now. I have a router with possibility to run LXC container with simple webserver (yay!), but I’m afraid to do it, to not wear the built-in memory…
Ahoj! I am aware you’d have to unmount the FS, and I don’t know how to do that on Omnia. Rescue shell sounds like it’s kept off the main FS and could do it; I hope it at least contains btrfsck, etc.
Memory wear: I guess the safest options for experiments is to do them on a USB stick. They’re easy to replace and very cheap, and people tend to have some extra ones anyway.
ZdravĂm!
Thats exactly reason why I mentioned my thread in your, I am also interested/worried, if this can be fail of memory itself.
Good point I will try “5 Leds” this evening.
So far I have tried btrfs scrub start/status, but even that seems to fail, as its ended immediately after start with no message given.
So, create LXC container, mount USB stick with the content in it? What about the webserver engine? Is is just about the data or would it be possible to move whole container on USB, to run the whole webserver there? What would you suggest to achieve the least wearing impact to the built-in memory?
Just keep in mind, that the 5-leds (edit: I thougth Weafyr talks about 4-leds) means complete loss of everything… it’s a fresh start. Try to backup everything possible. I’m not a linux guru, so I have no idea what can be restored and what cannot. But the config of firewall, wifi, leds configuration and so on works after restoring /etc folder. Maybe it’s even possible to restore LXC containers, but I didn;t tried that.
So far (I am limited by remote access) I have been able to install mmc-utils into tmp and get info about MMC, I don’t see anything wrong here
root@Turris:/tmp/sbin# ./mmc extcsd read /dev/mmcblk0
=============================================
Extended CSD rev 1.8 (MMC 5.1)
=============================================
Card Supported Command sets [S_CMD_SET: 0x01]
HPI Features [HPI_FEATURE: 0x01]: implementation based on CMD13
Background operations support [BKOPS_SUPPORT: 0x01]
Max Packet Read Cmd [MAX_PACKED_READS: 0x3f]
Max Packet Write Cmd [MAX_PACKED_WRITES: 0x3f]
Data TAG support [DATA_TAG_SUPPORT: 0x01]
Data TAG Unit Size [TAG_UNIT_SIZE: 0x00]
Tag Resources Size [TAG_RES_SIZE: 0x00]
Context Management Capabilities [CONTEXT_CAPABILITIES: 0x78]
Large Unit Size [LARGE_UNIT_SIZE_M1: 0x01]
Extended partition attribute support [EXT_SUPPORT: 0x03]
Generic CMD6 Timer [GENERIC_CMD6_TIME: 0x05]
Power off notification [POWER_OFF_LONG_TIME: 0x64]
Cache Size [CACHE_SIZE] is 1024 KiB
Background operations status [BKOPS_STATUS: 0x00]
1st Initialisation Time after programmed sector [INI_TIMEOUT_AP: 0x0a]
Power class for 52MHz, DDR at 3.6V [PWR_CL_DDR_52_360: 0x00]
Power class for 52MHz, DDR at 1.95V [PWR_CL_DDR_52_195: 0x00]
Power class for 200MHz at 3.6V [PWR_CL_200_360: 0x00]
Power class for 200MHz, at 1.95V [PWR_CL_200_195: 0x00]
Minimum Performance for 8bit at 52MHz in DDR mode:
[MIN_PERF_DDR_W_8_52: 0x00]
[MIN_PERF_DDR_R_8_52: 0x00]
TRIM Multiplier [TRIM_MULT: 0x01]
Secure Feature support [SEC_FEATURE_SUPPORT: 0x55]
Boot Information [BOOT_INFO: 0x07]
Device supports alternative boot method
Device supports dual data rate during boot
Device supports high speed timing during boot
Boot partition size [BOOT_SIZE_MULTI: 0x20]
Access size [ACC_SIZE: 0x06]
High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x01]
i.e. 512 KiB
High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x02]
Reliable write sector count [REL_WR_SEC_C: 0x01]
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x08]
i.e. 4096 KiB
Sleep current (VCC) [S_C_VCC: 0x07]
Sleep current (VCCQ) [S_C_VCCQ: 0x07]
Sleep/awake timeout [S_A_TIMEOUT: 0x11]
Sector Count [SEC_COUNT: 0x00e90000]
Device is block-addressed
Minimum Write Performance for 8bit:
[MIN_PERF_W_8_52: 0x00]
[MIN_PERF_R_8_52: 0x00]
[MIN_PERF_W_8_26_4_52: 0x00]
[MIN_PERF_R_8_26_4_52: 0x00]
Minimum Write Performance for 4bit:
[MIN_PERF_W_4_26: 0x00]
[MIN_PERF_R_4_26: 0x00]
Power classes registers:
[PWR_CL_26_360: 0x00]
[PWR_CL_52_360: 0x00]
[PWR_CL_26_195: 0x00]
[PWR_CL_52_195: 0x00]
Partition switching timing [PARTITION_SWITCH_TIME: 0x01]
Out-of-interrupt busy timing [OUT_OF_INTERRUPT_TIME: 0x05]
I/O Driver Strength [DRIVER_STRENGTH: 0x1f]
Card Type [CARD_TYPE: 0x57]
HS200 Single Data Rate eMMC @200MHz 1.8VI/O
HS Dual Data Rate eMMC @52MHz 1.8V or 3VI/O
HS eMMC @52MHz - at rated device voltage(s)
HS eMMC @26MHz - at rated device voltage(s)
CSD structure version [CSD_STRUCTURE: 0x02]
Command set [CMD_SET: 0x00]
Command set revision [CMD_SET_REV: 0x00]
Power class [POWER_CLASS: 0x00]
High-speed interface timing [HS_TIMING: 0x01]
Erased memory content [ERASED_MEM_CONT: 0x00]
Boot configuration bytes [PARTITION_CONFIG: 0x00]
Not boot enable
No access to boot partition
Boot config protection [BOOT_CONFIG_PROT: 0x00]
Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x00]
High-density erase group definition [ERASE_GROUP_DEF: 0x00]
Boot write protection status registers [BOOT_WP_STATUS]: 0x00
Boot Area Write protection [BOOT_WP]: 0x00
Power ro locking: possible
Permanent ro locking: possible
ro lock status: not locked
User area write protection register [USER_WP]: 0x00
FW configuration [FW_CONFIG]: 0x00
RPMB Size [RPMB_SIZE_MULT]: 0x20
Write reliability setting register [WR_REL_SET]: 0x1f
user area: the device protects existing data if a power failure occurs during a write operation
partition 1: the device protects existing data if a power failure occurs during a write operation
partition 2: the device protects existing data if a power failure occurs during a write operation
partition 3: the device protects existing data if a power failure occurs during a write operation
partition 4: the device protects existing data if a power failure occurs during a write operation
Write reliability parameter register [WR_REL_PARAM]: 0x15
Device supports writing EXT_CSD_WR_REL_SET
Device supports the enhanced def. of reliable write
Enable background operations handshake [BKOPS_EN]: 0x00
H/W reset function [RST_N_FUNCTION]: 0x00
HPI management [HPI_MGMT]: 0x01
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x0003a4
i.e. 3817472 KiB
Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
Device partition setting NOT complete
General Purpose Partition Size
[GP_SIZE_MULT_4]: 0x000000
[GP_SIZE_MULT_3]: 0x000000
[GP_SIZE_MULT_2]: 0x000000
[GP_SIZE_MULT_1]: 0x000000
Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000
i.e. 0 KiB
Enhanced User Data Start Address [ENH_START_ADDR]: 0x000000
i.e. 0 bytes offset
Bad Block Management mode [SEC_BAD_BLK_MGMNT]: 0x00
Periodic Wake-up [PERIODIC_WAKEUP]: 0x00
Program CID/CSD in DDR mode support [PROGRAM_CID_CSD_DDR_SUPPORT]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[127]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[126]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[125]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[124]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[123]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[122]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[121]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[120]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[119]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[118]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[117]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[116]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[115]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[114]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[113]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[112]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[111]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[110]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[109]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[108]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[107]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[106]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[105]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[104]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[103]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[102]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[101]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[100]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[99]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[98]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[97]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[96]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[95]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[94]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[93]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[92]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[91]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[90]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[89]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[88]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[87]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[86]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[85]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[84]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[83]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[82]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[81]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[80]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[79]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[78]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[77]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[76]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[75]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[74]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[73]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[72]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[71]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[70]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[69]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[68]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[67]]: 0x00
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[66]]: 0x37
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[65]]: 0xff
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[64]]: 0xff
Native sector size [NATIVE_SECTOR_SIZE]: 0x01
Sector size emulation [USE_NATIVE_SECTOR]: 0x00
Sector size [DATA_SECTOR_SIZE]: 0x00
1st initialization after disabling sector size emulation [INI_TIMEOUT_EMU]: 0x0a
Class 6 commands control [CLASS_6_CTRL]: 0x00
Number of addressed group to be Released[DYNCAP_NEEDED]: 0x00
Exception events control [EXCEPTION_EVENTS_CTRL]: 0x0000
Exception events status[EXCEPTION_EVENTS_STATUS]: 0x0000
Extended Partitions Attribute [EXT_PARTITIONS_ATTRIBUTE]: 0x0000
Context configuration [CONTEXT_CONF[51]]: 0x00
Context configuration [CONTEXT_CONF[50]]: 0x00
Context configuration [CONTEXT_CONF[49]]: 0x00
Context configuration [CONTEXT_CONF[48]]: 0x00
Context configuration [CONTEXT_CONF[47]]: 0x00
Context configuration [CONTEXT_CONF[46]]: 0x00
Context configuration [CONTEXT_CONF[45]]: 0x00
Context configuration [CONTEXT_CONF[44]]: 0x00
Context configuration [CONTEXT_CONF[43]]: 0x00
Context configuration [CONTEXT_CONF[42]]: 0x00
Context configuration [CONTEXT_CONF[41]]: 0x00
Context configuration [CONTEXT_CONF[40]]: 0x00
Context configuration [CONTEXT_CONF[39]]: 0x00
Context configuration [CONTEXT_CONF[38]]: 0x00
Context configuration [CONTEXT_CONF[37]]: 0x00
Packed command status [PACKED_COMMAND_STATUS]: 0x00
Packed command failure index [PACKED_FAILURE_INDEX]: 0x00
Power Off Notification [POWER_OFF_NOTIFICATION]: 0x01
Control to turn the Cache ON/OFF [CACHE_CTRL]: 0x01
eMMC Firmware Version:
Command Queue Support [CMDQ_SUPPORT]: 0x00
Command Queue Depth [CMDQ_DEPTH]: 1
Command Enabled [CMDQ_MODE_EN]: 0x00
root@Turris:/tmp/sbin#
I have fixed the preview of log (by accident I finally found the right tag for this forum), but I refuse to use any third party service as it create more mess according to my view and you have to agree another term services…
The result:
I have boot into Rescue mode, save my files (/home, /www, /root, /etc…)
and then I run btrfs check --repair /dev/mmcblk0p1 (took a lot of time)
Well the result after restart was kernel panic, so I gave up and flashed medkit.
Now everything seems to be working again.
Also I have noted, when I did backup to my flash disk, and coping the /srv folder, where the lxc data are stored I got multiple errors from kernel, this means for me that it’s not save to run anything in LXC on internal flash, even webserver with almost no access, so I am going to move this folder to harddrive or usb ssd.
Zdravim,
brtrfs scrub is running in background in default - no message is given, you can check status using btrfs scrub status /mountpoint
or add -B parameter - which force scrub to run in foreground and print results.
ZdravĂm,
I am not sure that scrub is running on my router now. After the btrfs scrub status /dev/mmcblk0p1 or btrfs scrub status / I am getting no stats available.