Hi.
I bought a new Turris Omnia a few months ago. I tried to use the latest OpenWrt built by myself from git sources. I get random memory allocation errors. Sometimes they even happen during kernel boot. I tried enabling every possible debug option in the kernel, including memtest. It doesn’t find anything wrong with the memory, but still gives random memory allocation errors.
BootROM - 1.73
Booting from SPI flash
U-Boot SPL 2022.10-rc5-OpenWrt-r16654+122-8e5de89769 (Sep 20 2022 - 14:11:36 +0000)
High speed PHY - Version: 2.0
MiniPCIe/mSATA card detection... mSATA
WWAN slot configuration... PCIe+USB2.0
Detected Device ID 6820
board SerDes lanes topology details:
| Lane # | Speed | Type |
--------------------------------
| 0 | 6 | SATA0 |
| 1 | 5 | USB3 HOST0 |
| 2 | 5 | PCIe1 |
| 3 | 5 | USB3 HOST1 |
| 4 | 5 | PCIe2 |
| 5 | 0 | SGMII2 |
--------------------------------
High speed PHY - Ended Successfully
mv_ddr: 14.0.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
mv_ddr: completed successfully
Trying to boot from SPI
U-Boot 2022.10-rc5-OpenWrt-r16654+122-8e5de89769 (Sep 20 2022 - 14:11:36 +0000), Build: jenkins-turris-os-packages-lions-omnia-2009
SoC: MV88F6820-A0 at 1600 MHz
DRAM: 2 GiB (800 MHz, 32-bit, 2T, ECC not enabled)
Core: 72 devices, 26 uclasses, devicetree: separate
WDT: Started watchdog@20300 with servicing (60s timeout)
MMC: mv_sdh: 0
Loading Environment from SPIFlash... SF: Detected s25fl164k with page size 256 Bytes, erase size 4 KiB, total 8 MiB
OK
Model: Turris Omnia
MCU type: GD32
MCU version: 2b51193a5870ba230a7fb73ba16fcf8a7fe2a240/67eddc9540526d0a9d9660f7a7867af9a28a68d6
RAM size: 2048 MiB
Serial Number: 0000000E7001AA56
Disabling MCU watchdog... disabled
Regdomain set to **
pcie1.0: Link up
pcie2.0: Link up
Net: eth0: ethernet@70000, eth1: ethernet@30000, eth2: ethernet@34000 [PRIME]
Hit any key to stop autoboot: 1 0
4271864 bytes read in 263 ms (15.5 MiB/s)
22275 bytes read in 14 ms (1.5 MiB/s)
Kernel image @ 0x1000000 [ 0x000000 - 0x412ef8 ]
## Flattened Device Tree blob at 02000000
Booting using the fdt blob at 0x2000000
Loading Device Tree to 0fff7000, end 0fffffff ... OK
Starting kernel ...
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 6.1.89 (M95D@psihoexpert.ro) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 13.2.0 r26290+23-dc9220f748) 13.2.0, GNU ld (GNU Binutils) 2.42) #0 SMP Wed May 29 16:15:51 2024
[ 0.000000][ T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Turris Omnia
[ 0.000000][ T0] Memory policy: Data cache writealloc
[ 0.000000][ T0] early_memtest: # of tests: 17
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 4c494e5558726c7a
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 4c494e5558726c7a
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 4c494e5558726c7a
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 4c494e5558726c7a
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 4c494e5558726c7a
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern eeeeeeeeeeeeeeee
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern eeeeeeeeeeeeeeee
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern eeeeeeeeeeeeeeee
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern eeeeeeeeeeeeeeee
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern eeeeeeeeeeeeeeee
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern dddddddddddddddd
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern dddddddddddddddd
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern dddddddddddddddd
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern dddddddddddddddd
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern dddddddddddddddd
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern bbbbbbbbbbbbbbbb
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern bbbbbbbbbbbbbbbb
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern bbbbbbbbbbbbbbbb
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern bbbbbbbbbbbbbbbb
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern bbbbbbbbbbbbbbbb
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 7777777777777777
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 7777777777777777
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 7777777777777777
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 7777777777777777
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 7777777777777777
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern cccccccccccccccc
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern cccccccccccccccc
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern cccccccccccccccc
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern cccccccccccccccc
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern cccccccccccccccc
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 9999999999999999
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 9999999999999999
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 9999999999999999
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 9999999999999999
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 9999999999999999
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 6666666666666666
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 6666666666666666
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 6666666666666666
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 6666666666666666
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 6666666666666666
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 3333333333333333
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 3333333333333333
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 3333333333333333
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 3333333333333333
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 3333333333333333
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 8888888888888888
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 8888888888888888
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 8888888888888888
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 8888888888888888
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 8888888888888888
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 4444444444444444
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 4444444444444444
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 4444444444444444
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 4444444444444444
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 4444444444444444
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 2222222222222222
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 2222222222222222
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 2222222222222222
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 2222222222222222
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 2222222222222222
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 1111111111111111
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 1111111111111111
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 1111111111111111
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 1111111111111111
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 1111111111111111
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern aaaaaaaaaaaaaaaa
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern aaaaaaaaaaaaaaaa
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern aaaaaaaaaaaaaaaa
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern aaaaaaaaaaaaaaaa
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern aaaaaaaaaaaaaaaa
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 5555555555555555
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 5555555555555555
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 5555555555555555
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 5555555555555555
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 5555555555555555
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern ffffffffffffffff
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern ffffffffffffffff
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern ffffffffffffffff
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern ffffffffffffffff
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern ffffffffffffffff
[ 0.000000][ T0] 0x00000000 - 0x00004000 pattern 0000000000000000
[ 0.000000][ T0] 0x00008000 - 0x00100000 pattern 0000000000000000
[ 0.000000][ T0] 0x00eac480 - 0x0fff7000 pattern 0000000000000000
[ 0.000000][ T0] 0x0fffd000 - 0x2fff9000 pattern 0000000000000000
[ 0.000000][ T0] 0x2fffc000 - 0x2fffcfd8 pattern 0000000000000000
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000][ T0] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000][ T0] percpu: Embedded 11 pages/cpu s14292 r8192 d22572 u45056
[ 0.000000][ T0] pcpu-alloc: s14292 r8192 d22572 u45056 alloc=11*4096
[ 0.000000][ T0] pcpu-alloc: [0] 0 [0] 1
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 522752
[ 0.000000][ T0] Kernel command line: earlyprintk console=ttyS0,115200 root=/dev/mmcblk0p2 rootdelay=10 memtest=17 page_owner=on page_poison=1
[ 0.000000][ T0] Unknown kernel command line parameters "earlyprintk", will be passed to user space.
[ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] allocated 31457280 bytes of page_ext
[ 0.000000][ T0] mem auto-init: CONFIG_PAGE_POISONING is on, will take precedence over init_on_alloc and init_on_free
[ 0.000000][ T0] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000][ T0] stackdepot hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] Memory: 2034796K/2097152K available (10240K kernel code, 465K rwdata, 1480K rodata, 1024K init, 223K bss, 62356K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000][ T0] Node 0, zone Normal: page owner found early allocated 10 pages
[ 0.000000][ T0] Node 0, zone HighMem: page owner found early allocated 0 pages
[ 0.000000][ T0] rcu: Hierarchical RCU implementation.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
[ 0.000000][ T0] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000][ T0] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000][ T0] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000][ T0] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000][ T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000][ T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000001][ T0] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000013][ T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns
[ 0.000027][ T0] Switching to timer-based delay loop, resolution 1ns
[ 0.000172][ T0] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000176][ T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000325][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=8000000)
[ 0.000333][ T0] CPU: Testing write buffer coherency: ok
[ 0.000371][ T0] CPU0: Spectre v2: using BPIALL workaround
[ 0.000375][ T0] pid_max: default: 32768 minimum: 301
[ 0.000536][ T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000556][ T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001692][ T1] Setting up static identity map for 0x100000 - 0x100060
[ 0.001775][ T1] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.001864][ T1] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.001949][ T1] rcu: Hierarchical SRCU implementation.
[ 0.001952][ T1] rcu: Max phase no-delay instances is 1000.
[ 0.002301][ T1] smp: Bringing up secondary CPUs ...
[ 0.002616][ T1] Booting CPU 1
[ 0.002744][ T0] CPU1: Spectre v2: using BPIALL workaround
[ 0.002788][ T1] smp: Brought up 1 node, 2 CPUs
[ 0.002793][ T1] SMP: Total of 2 processors activated (3200.00 BogoMIPS).
[ 0.002797][ T1] CPU: All CPU(s) started in SVC mode.
[ 0.003253][ T1] devtmpfs: initialized
[ 0.006034][ T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.006100][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.006157][ T1] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.006185][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.006612][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.007463][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.007872][ T1] audit: initializing netlink subsys (disabled)
[ 0.008044][ T22] audit: type=2000 audit(0.000:1): state=initialized audit_enabled=0 res=1
[ 0.008204][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.008395][ T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.008400][ T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.017527][ T1] cryptd: max_cpu_qlen set to 1000
[ 0.018046][ T1] raid6: skipped pq benchmark and selected neonx8
[ 0.018051][ T1] raid6: using neon recovery algorithm
[ 0.018361][ T1] SCSI subsystem initialized
[ 0.018381][ T1] libata version 3.00 loaded.
[ 0.018463][ T1] usbcore: registered new interface driver usbfs
[ 0.018509][ T1] usbcore: registered new interface driver hub
[ 0.018526][ T1] usbcore: registered new device driver usb
[ 0.019257][ T1] clocksource: Switched to clocksource arm_global_timer
[ 0.020289][ T1] NET: Registered PF_INET protocol family
[ 0.020552][ T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.021485][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.021803][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.021856][ T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.022053][ T1] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.022172][ T1] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.022351][ T1] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.022396][ T1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.022516][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.022982][ T1] RPC: Registered named UNIX socket transport module.
[ 0.022987][ T1] RPC: Registered udp transport module.
[ 0.022989][ T1] RPC: Registered tcp transport module.
[ 0.022990][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.022997][ T1] PCI: CLS 0 bytes, default 64
[ 0.023922][ T1] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[ 0.026476][ T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.026927][ T1] NFS: Registering the id_resolver key type
[ 0.026953][ T1] Key type id_resolver registered
[ 0.026955][ T1] Key type id_legacy registered
[ 0.026995][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.026998][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.078299][ T1] NET: Registered PF_ALG protocol family
[ 0.078340][ T1] xor: measuring software checksum speed
[ 0.082110][ T1] arm4regs : 2614 MB/sec
[ 0.087036][ T1] 8regs : 1997 MB/sec
[ 0.091984][ T1] 32regs : 1997 MB/sec
[ 0.096991][ T1] neon : 1965 MB/sec
[ 0.096993][ T1] xor: using function: arm4regs (2614 MB/sec)
[ 0.097628][ T1] bounce: pool size: 64 pages
[ 0.097703][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.097913][ T35] cryptomgr_test (35) used greatest stack depth: 7792 bytes left
[ 0.098939][ T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.100135][ T1] mvebu-pcie soc:pcie: host bridge /soc/pcie ranges:
[ 0.100149][ T1] mvebu-pcie soc:pcie: Parsing ranges property...
[ 0.100162][ T1] mvebu-pcie soc:pcie: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 0.100176][ T1] mvebu-pcie soc:pcie: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 0.100187][ T1] mvebu-pcie soc:pcie: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 0.100198][ T1] mvebu-pcie soc:pcie: MEM 0x00f1048000..0x00f1049fff -> 0x0000048000
[ 0.100209][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 0.100220][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 0.100230][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 0.100240][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 0.100251][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
[ 0.100261][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
[ 0.100271][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
[ 0.100278][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
[ 0.100354][ T1] mvebu-pcie soc:pcie: pcie1.0: Slot power limit 10.0W
[ 0.100406][ T1] mvebu-pcie soc:pcie: pcie2.0: Slot power limit 10.0W
[ 0.100573][ T1] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[ 0.100580][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.100587][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 0.100593][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 0.100598][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 0.100603][ T1] pci_bus 0000:00: root bus resource [mem 0xf1048000-0xf1049fff] (bus address [0x00048000-0x00049fff])
[ 0.100607][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.100611][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 0.100616][ T1] pci_bus 0000:00: scanning bus
[ 0.100740][ T1] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.100925][ T1] pci 0000:00:03.0: [11ab:6820] type 01 class 0x060400
[ 0.101859][ T1] pci_bus 0000:00: fixups for bus
[ 0.101868][ T1] PCI: bus0: Fast back to back transfers disabled
[ 0.101873][ T1] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 0
[ 0.101877][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.101885][ T1] pci 0000:00:03.0: scanning [bus 00-00] behind bridge, pass 0
[ 0.101889][ T1] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.101895][ T1] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 1
[ 0.101957][ T1] pci_bus 0000:01: scanning bus
[ 0.101981][ T1] pci 0000:01:00.0: [168c:0030] type 00 class 0x028000
[ 0.102001][ T1] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc001ffff 64bit]
[ 0.102031][ T1] pci 0000:01:00.0: reg 0x30: [mem 0xc0020000-0xc002ffff pref]
[ 0.102100][ T1] pci 0000:01:00.0: supports D1
[ 0.102104][ T1] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.102110][ T1] pci 0000:01:00.0: PME# disabled
[ 0.102233][ T1] pci_bus 0000:01: fixups for bus
[ 0.102239][ T1] PCI: bus1: Fast back to back transfers disabled
[ 0.102243][ T1] pci_bus 0000:01: bus scan returning with max=01
[ 0.102247][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.102255][ T1] pci 0000:00:03.0: scanning [bus 00-00] behind bridge, pass 1
[ 0.102300][ T1] pci_bus 0000:02: scanning bus
[ 0.102324][ T1] pci 0000:02:00.0: [168c:002e] type 00 class 0x028000
[ 0.102344][ T1] pci 0000:02:00.0: reg 0x10: [mem 0xc8000000-0xc800ffff 64bit]
[ 0.102442][ T1] pci 0000:02:00.0: supports D1
[ 0.102446][ T1] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.102451][ T1] pci 0000:02:00.0: PME# disabled
[ 0.102580][ T1] pci_bus 0000:02: fixups for bus
[ 0.102586][ T1] PCI: bus2: Fast back to back transfers disabled
[ 0.102590][ T1] pci_bus 0000:02: bus scan returning with max=02
[ 0.102593][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.102600][ T1] pci_bus 0000:00: bus scan returning with max=02
[ 0.102615][ T1] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
[ 0.102623][ T1] pci 0000:00:03.0: BAR 8: assigned [mem 0xe0100000-0xe01fffff]
[ 0.102630][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe001ffff 64bit]
[ 0.102641][ T1] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0020000-0xe002ffff pref]
[ 0.102646][ T1] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.102652][ T1] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.102663][ T1] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0100000-0xe010ffff 64bit]
[ 0.102674][ T1] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.102678][ T1] pci 0000:00:03.0: bridge window [mem 0xe0100000-0xe01fffff]
[ 0.102717][ T1] pcieport 0000:00:02.0: assign IRQ: got 0
[ 0.102725][ T1] pcieport 0000:00:02.0: enabling device (0140 -> 0142)
[ 0.102733][ T1] pcieport 0000:00:02.0: enabling bus mastering
[ 0.102772][ T1] pcieport 0000:00:03.0: assign IRQ: got 0
[ 0.102778][ T1] pcieport 0000:00:03.0: enabling device (0140 -> 0142)
[ 0.102785][ T1] pcieport 0000:00:03.0: enabling bus mastering
[ 0.103079][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.170351][ T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.170520][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.230339][ T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.230632][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.231099][ T1] printk: console [ttyS0] disabled
[ 0.251184][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 40, base_baud = 15625000) is a 16550A
[ 2.092130][ C0] workqueue: round-robin CPU selection forced, expect performance impact
[ 2.195455][ T1] printk: console [ttyS0] enabled
[ 2.220797][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 41, base_baud = 15625000) is a 16550A
[ 2.231431][ T1] loop: module loaded
[ 2.235527][ T1] zram: Added device: zram0
[ 2.240197][ T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 2.249980][ T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 2.260311][ T1] scsi host0: ahci-mvebu
[ 2.264784][ T1] scsi host1: ahci-mvebu
[ 2.269025][ T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 42
[ 2.277678][ T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 42
[ 2.287225][ T1] spi-nor spi0.0: s25fl164k (8192 Kbytes)
[ 2.293257][ T46] kworker/u4:2 (46) used greatest stack depth: 6760 bytes left
[ 2.300711][ T1] 3 fixed-partitions partitions found on MTD device spi0.0
[ 2.307781][ T1] Creating 3 MTD partitions on "spi0.0":
[ 2.313311][ T1] 0x000000000000-0x0000000f0000 : "U-Boot"
[ 2.319333][ T1] 0x000000100000-0x000000800000 : "Rescue system"
[ 2.325882][ T1] 0x0000000f0000-0x000000100000 : "u-boot-env"
[ 2.332995][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 2.341571][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 2.352449][ T1] tun: Universal TUN/TAP device driver, 1.6
[ 2.359181][ T1] hwmon hwmon0: temp1_input not attached to any thermal zone
[ 2.367079][ T1] mv88e6085 f1072004.mdio-mii:10: switch 0x1760 detected: Marvell 88E6176, revision 1
[ 2.388979][ T1] hwmon hwmon1: temp1_input not attached to any thermal zone
[ 2.402265][ T1] hwmon hwmon2: temp1_input not attached to any thermal zone
[ 2.415470][ T1] hwmon hwmon3: temp1_input not attached to any thermal zone
[ 2.428494][ T1] hwmon hwmon4: temp1_input not attached to any thermal zone
[ 2.441719][ T1] hwmon hwmon5: temp1_input not attached to any thermal zone
[ 2.505795][ T1] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 2.522449][ T1] mvneta f1070000.ethernet eth0: Using device tree mac address d8:58:d7:02:62:aa
[ 2.537968][ T1] mvneta f1030000.ethernet eth1: Using device tree mac address d8:58:d7:02:62:a8
[ 2.553495][ T1] mvneta f1034000.ethernet eth2: Using device tree mac address d8:58:d7:02:62:a9
[ 2.562639][ T1] PPP generic driver version 2.4.2
[ 2.567765][ T1] PPP BSD Compression module registered
[ 2.573197][ T1] PPP Deflate Compression module registered
[ 2.579192][ T1] PPP MPPE Compression module registered
[ 2.584754][ T1] NET: Registered PF_PPPOX protocol family
[ 2.590449][ T1] PPTP driver version 0.8.5
[ 2.595802][ T1] orion-ehci f1058000.usb: EHCI Host Controller
[ 2.601949][ T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 2.610328][ T1] orion-ehci f1058000.usb: irq 47, io mem 0xf1058000
[ 2.610572][ T41] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.623008][ T39] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.639261][ T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 2.645978][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 2.654973][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.662915][ T1] usb usb1: Product: EHCI Host Controller
[ 2.668501][ T1] usb usb1: Manufacturer: Linux 6.1.89 ehci_hcd
[ 2.674616][ T1] usb usb1: SerialNumber: f1058000.usb
[ 2.680255][ T1] hub 1-0:1.0: USB hub found
[ 2.684727][ T1] hub 1-0:1.0: 1 port detected
[ 2.689867][ T1] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 2.695899][ T1] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[ 2.704242][ T1] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 2.714211][ T1] xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000
[ 2.720764][ T1] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 2.726793][ T1] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[ 2.735213][ T1] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed
[ 2.742361][ T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 2.751352][ T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.759297][ T1] usb usb2: Product: xHCI Host Controller
[ 2.764883][ T1] usb usb2: Manufacturer: Linux 6.1.89 xhci-hcd
[ 2.770996][ T1] usb usb2: SerialNumber: f10f0000.usb3
[ 2.776648][ T1] hub 2-0:1.0: USB hub found
[ 2.781128][ T1] hub 2-0:1.0: 1 port detected
[ 2.785935][ T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.794841][ T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 2.803831][ T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.811779][ T1] usb usb3: Product: xHCI Host Controller
[ 2.817366][ T1] usb usb3: Manufacturer: Linux 6.1.89 xhci-hcd
[ 2.823483][ T1] usb usb3: SerialNumber: f10f0000.usb3
[ 2.829118][ T1] hub 3-0:1.0: USB hub found
[ 2.833594][ T1] hub 3-0:1.0: 1 port detected
[ 2.838514][ T1] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 2.844555][ T1] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[ 2.852912][ T1] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 2.862881][ T1] xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000
[ 2.869438][ T1] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 2.875465][ T1] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[ 2.883681][ T1] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 2.890823][ T1] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 2.899812][ T1] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.907750][ T1] usb usb4: Product: xHCI Host Controller
[ 2.913340][ T1] usb usb4: Manufacturer: Linux 6.1.89 xhci-hcd
[ 2.919452][ T1] usb usb4: SerialNumber: f10f8000.usb3
[ 2.925103][ T1] hub 4-0:1.0: USB hub found
[ 2.929743][ T1] hub 4-0:1.0: 1 port detected
[ 2.934556][ T1] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.943480][ T1] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 2.952471][ T1] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.960417][ T1] usb usb5: Product: xHCI Host Controller
[ 2.966003][ T1] usb usb5: Manufacturer: Linux 6.1.89 xhci-hcd
[ 2.972119][ T1] usb usb5: SerialNumber: f10f8000.usb3
[ 2.977749][ T1] hub 5-0:1.0: USB hub found
[ 2.982228][ T1] hub 5-0:1.0: 1 port detected
[ 2.987140][ T1] usbcore: registered new interface driver usb-storage
[ 2.993885][ T1] usbcore: registered new device driver onboard-usb-hub
[ 3.001532][ T1] armada38x-rtc f10a3800.rtc: registered as rtc0
[ 3.007804][ T1] armada38x-rtc f10a3800.rtc: setting system clock to 2024-06-05T20:16:49 UTC (1717618609)
[ 3.017774][ T1] i2c_dev: i2c /dev entries driver
[ 3.024963][ T1] at24 1-0054: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
[ 3.032421][ T1] i2c i2c-0: Added multiplexed i2c bus 1
[ 3.038028][ T1] i2c i2c-0: Added multiplexed i2c bus 2
[ 3.043661][ T1] i2c i2c-0: Added multiplexed i2c bus 3
[ 3.049262][ T1] i2c i2c-0: Added multiplexed i2c bus 4
[ 3.054877][ T1] i2c i2c-0: Added multiplexed i2c bus 5
[ 3.060470][ T1] i2c i2c-0: Added multiplexed i2c bus 6
[ 3.066106][ T1] i2c i2c-0: Added multiplexed i2c bus 7
[ 3.071898][ T1] pca953x 8-0071: using no AI
[ 3.078077][ T1] i2c i2c-0: Added multiplexed i2c bus 8
[ 3.083599][ T1] pca954x 0-0070: registered 8 multiplexed busses for I2C mux pca9547
[ 3.089260][ T63] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[ 3.093511][ T1] orion_wdt: Initial timeout 171 sec
[ 3.104141][ T1] sdhci: Secure Digital Host Controller Interface driver
[ 3.111043][ T1] sdhci: Copyright(c) Pierre Ossman
[ 3.116176][ T1] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.143413][ T1] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 3.151224][ T8] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 3.160410][ T1] turris-omnia-mcu 1-002a: MCU type GD32
[ 3.168154][ T1] turris-omnia-mcu 1-002a: MCU bootloader firmware version hash: 2b51193a5870ba230a7fb73ba16fcf8a7fe2a240
[ 3.181551][ T1] turris-omnia-mcu 1-002a: MCU application firmware version hash: 67eddc9540526d0a9d9660f7a7867af9a28a68d6
[ 3.196170][ T1] turris-omnia-mcu 1-002a: registered as rtc1
[ 3.204632][ T1] gre: GRE over IPv4 demultiplexor driver
[ 3.210238][ T1] ip_gre: GRE over IPv4 tunneling driver
[ 3.216768][ T1] NET: Registered PF_INET6 protocol family
[ 3.223718][ T1] Segment Routing with IPv6
[ 3.228114][ T1] In-situ OAM (IOAM) with IPv6
[ 3.233167][ T1] ip6_gre: GRE over IPv6 tunneling driver
[ 3.239072][ T1] NET: Registered PF_PACKET protocol family
[ 3.244860][ T1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.258683][ T1] 8021q: 802.1Q VLAN Support v1.8
[ 3.263607][ T1] Key type dns_resolver registered
[ 3.268652][ T1] Registering SWP/SWPB emulation handler
[ 3.275394][ T1] registered taskstats version 1
[ 3.284457][ T13] mmc0: new high speed MMC card at address 0001
[ 3.289918][ T1] pagealloc: memory corruption
[ 3.295224][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.299283][ T63] usb 2-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[ 3.303969][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.312857][ T63] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.321565][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.321569][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.329418][ T63] usb 2-1: Product: Mass Storage
[ 3.338132][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.346864][ T63] usb 2-1: Manufacturer: Generic
[ 3.351654][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.351657][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.360378][ T63] usb 2-1: SerialNumber: 0FEB6A17
[ 3.369782][ T63] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3.373933][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.382933][ T63] scsi host2: usb-storage 2-1:1.0
[ 3.387515][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.387519][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.387522][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.434095][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.442821][ T1] (ptrval): ff aa aa aa df aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.451544][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.460267][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.468986][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.477710][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.486432][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.495156][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.503879][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.512603][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.521325][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.530048][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.538768][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.547490][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.556214][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.564937][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.573661][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.582383][ T1] (ptrval): ff aa aa aa bf aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.591107][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.599830][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.608549][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.617272][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.625994][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.634718][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.643441][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.652165][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.660888][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.669611][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.678330][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.687053][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.695777][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.704500][ T1] (ptrval): fd aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.713224][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.721947][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.730671][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.739394][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 aa aa aa ................
[ 3.748113][ T1] (ptrval): ff aa aa aa ff aa aa aa 00 aa aa aa 00 .............
[ 3.756577][ T1] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.89 #0
[ 3.763210][ T1] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 3.769842][ T1] Function entered at [<c010f6c4>] from [<c010aed8>]
[ 3.776386][ T1] Function entered at [<c010aed8>] from [<c0aa8c3c>]
[ 3.782929][ T1] Function entered at [<c0aa8c3c>] from [<c024d73c>]
[ 3.789470][ T1] Function entered at [<c024d73c>] from [<c0238544>]
[ 3.796013][ T1] Function entered at [<c0238544>] from [<c023a418>]
[ 3.802555][ T1] Function entered at [<c023a418>] from [<c023ad9c>]
[ 3.809097][ T1] Function entered at [<c023ad9c>] from [<c0234a4c>]
[ 3.815639][ T1] Function entered at [<c0234a4c>] from [<c0234ee8>]
[ 3.822181][ T1] Function entered at [<c0234ee8>] from [<c05b3e40>]
[ 3.828722][ T1] Function entered at [<c05b3e40>] from [<c05b4010>]
[ 3.835264][ T1] Function entered at [<c05b4010>] from [<c05939f0>]
[ 3.841807][ T1] Function entered at [<c05939f0>] from [<c024ad58>]
[ 3.848349][ T1] Function entered at [<c024ad58>] from [<c01315a4>]
[ 3.854891][ T1] Function entered at [<c01315a4>] from [<c01329f0>]
[ 3.861432][ T1] Function entered at [<c01329f0>] from [<c024b024>]
[ 3.867975][ T1] Function entered at [<c024b024>] from [<c0d247cc>]
[ 3.874517][ T1] Function entered at [<c0d247cc>] from [<c01019e4>]
[ 3.881059][ T1] Function entered at [<c01019e4>] from [<c0d01f84>]
[ 3.887601][ T1] Function entered at [<c0d01f84>] from [<c0ad1a58>]
[ 3.894143][ T1] Function entered at [<c0ad1a58>] from [<c010014c>]
[ 3.900685][ T1] Exception stack(0xf0831fb0 to 0xf0831ff8)
[ 3.906445][ T1] 1fa0: 00000000 00000000 00000000 00000000
[ 3.915340][ T1] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 3.924234][ T1] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 3.931567][ T1] page:(ptrval) refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x7ffff
[ 3.940206][ T1] flags: 0x40000000(zone=1)
[ 3.944578][ T1] raw: 40000000 00000100 00000122 00000000 00000000 00000000 ffffffff 00000001
[ 3.953389][ T1] page dumped because: pagealloc: corrupted page details
[ 3.960283][ T1] page_owner info is not present (never set?)
[ 3.966961][ T1] zswap: loaded using pool zstd/zsmalloc
[ 3.972536][ T13] mmcblk0: mmc0:0001 008G30 7.28 GiB
[ 3.984691][ T1] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 3.992179][ T13] mmcblk0: p1 p2
[ 3.996336][ T13] mmcblk0boot0: mmc0:0001 008G30 4.00 MiB
[ 4.002874][ T13] mmcblk0boot1: mmc0:0001 008G30 4.00 MiB
[ 4.009076][ T13] mmcblk0rpmb: mmc0:0001 008G30 4.00 MiB, chardev (250:0)
[ 4.025605][ T8] mv88e6085 f1072004.mdio-mii:10: switch 0x1760 detected: Marvell 88E6176, revision 1
[ 4.047914][ T8] hwmon hwmon2: temp1_input not attached to any thermal zone
[ 4.061357][ T8] hwmon hwmon3: temp1_input not attached to any thermal zone
[ 4.074452][ T8] hwmon hwmon4: temp1_input not attached to any thermal zone
[ 4.087678][ T8] hwmon hwmon5: temp1_input not attached to any thermal zone
[ 4.100544][ T8] hwmon hwmon6: temp1_input not attached to any thermal zone
[ 4.410922][ T13] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
[ 4.421984][ T38] sd 2:0:0:0: [sda] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
[ 4.431074][ T38] sd 2:0:0:0: [sda] Write Protect is off
[ 4.436578][ T38] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 4.443013][ T38] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.456780][ T38] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 4.816371][ T8] mv88e6085 f1072004.mdio-mii:10: configuring for fixed/rgmii-id link mode
[ 4.826506][ T8] mv88e6085 f1072004.mdio-mii:10: configuring for fixed/rgmii-id link mode
[ 4.836241][ T13] mv88e6085 f1072004.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off
[ 4.848575][ T67] mv88e6085 f1072004.mdio-mii:10: Link is Up - 1Gbps/Full - flow control off
[ 4.942865][ T8] mv88e6085 f1072004.mdio-mii:10 lan0 (uninitialized): PHY [mv88e6xxx-1:00] driver [Marvell 88E1540] (irq=68)
[ 5.053048][ T8] mv88e6085 f1072004.mdio-mii:10 lan1 (uninitialized): PHY [mv88e6xxx-1:01] driver [Marvell 88E1540] (irq=69)
[ 5.153028][ T8] mv88e6085 f1072004.mdio-mii:10 lan2 (uninitialized): PHY [mv88e6xxx-1:02] driver [Marvell 88E1540] (irq=70)
[ 5.252673][ T8] mv88e6085 f1072004.mdio-mii:10 lan3 (uninitialized): PHY [mv88e6xxx-1:03] driver [Marvell 88E1540] (irq=71)
[ 5.353030][ T8] mv88e6085 f1072004.mdio-mii:10 lan4 (uninitialized): PHY [mv88e6xxx-1:04] driver [Marvell 88E1540] (irq=72)
[ 5.366984][ T8] device eth1 entered promiscuous mode
[ 5.379922][ T8] device eth0 entered promiscuous mode
[ 5.385292][ T8] DSA: tree 0 setup
[ 5.389237][ T1] clk: Disabling unused clocks
[ 5.394080][ T1] Waiting 10 sec before mounting root device...
f
[ 15.860976][ T1] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 15.871534][ T1] devtmpfs: mounted
[ 15.876594][ T1] Freeing unused kernel image (initmem) memory: 1024K
[ 15.883651][ T1] Checked W+X mappings: passed, no W+X pages found
[ 15.890060][ T1] Run /sbin/init as init process
[ 15.894864][ T1] with arguments:
[ 15.898533][ T1] /sbin/init
[ 15.901947][ T1] earlyprintk
[ 15.905443][ T1] with environment:
[ 15.909293][ T1] HOME=/
[ 15.912353][ T1] TERM=linux
[ 16.054289][ T1] init: Console is alive
[ 16.058640][ T1] init: - watchdog -
[ 16.462757][ T212] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 16.490482][ T212] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 16.504817][ T212] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 16.513713][ T212] kmodloader (212) used greatest stack depth: 6176 bytes left
[ 16.515955][ T1] init: - preinit -
[ 16.748112][ T217] cat (217) used greatest stack depth: 5992 bytes left
[ 19.339257][ C1] random: crng init done
[ 19.548953][ T276] mvneta f1030000.ethernet eth1: configuring for fixed/rgmii link mode
[ 19.557536][ T67] mvneta f1030000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 19.559580][ T276] mv88e6085 f1072004.mdio-mii:10 lan0: configuring for phy/gmii link mode
[ 19.575973][ T67] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 19.576506][ T276] ip (276) used greatest stack depth: 5600 bytes left
Press the [f] key and hit [enter] to enter failsafe mode
Does that look like a hardware fault to you? Is there is an official test/debug program for hardware that I can run, maybe something the factory uses for QC?
Thanks.