Could someone of you help me please?
I just installed WLE1216V5-20 7A into my Omnia with NAS (latest stable OS 4.0.5) into middle pcie slot and I want to use it with WLE900VX (at 2,4GHz).
I have installed ath10k-firmware-qca9984 for WLE1216V5-20 and there is ath10k-firmware-qca988x for WLE900VX via LUCI. Both are visible in Foris and can be configured.
Problem is that for WLE1216V5-20 there is no 160MHz or 80+80 channel in Foris and when I tried to set 160MHz in LUCI, but notebook was unable to connect to that network (Intel AX200).
I have tried to change board-2.bin file with that from CandelaTech, together with original firmware and together with firmware from CandelaTech but without any success. After every combination reboot was performed.
lspci gives me following:
root@turris:~# lspci
00:01.0 PCI bridge: Marvell Technology Group Ltd. Device 6820 (rev 04)
00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6820 (rev 04)
00:03.0 PCI bridge: Marvell Technology Group Ltd. Device 6820 (rev 04)
01:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter
02:00.0 Network controller: Qualcomm Atheros Device 0046
03:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
In kernel log there are some errors even with original firmware…
[ 16.420653] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 16.674281] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 16.685055] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 17.119004] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts:
[ 17.423900] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
[ 18.717501] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[ 18.726683] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[ 18.737074] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 18.747336] firmware ath10k!cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[ 18.756119] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 18.766874] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 18.777018] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 18.794152] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 18.803422] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 18.812943] ath10k_pci 0000:01:00.0: firmware ver 10.2.4-1.0-00037 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 a4a52adb
[ 18.857738] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 18.868206] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 18.878552] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 18.888637] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 20.024679] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[ 20.141797] ath: EEPROM regdomain: 0x0
[ 20.141800] ath: EEPROM indicates default country code should be used
[ 20.141801] ath: doing EEPROM country->regdmn map search
[ 20.141805] ath: country maps to regdmn code: 0x3a
[ 20.141807] ath: Country alpha2 being used: US
[ 20.141808] ath: Regpair used: 0x3a
[ 20.143589] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 20.149524] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 20.322749] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[ 20.333503] ath10k_pci 0000:02:00.0: Falling back to user helper
[ 20.427764] firmware ath10k!pre-cal-pci-0000:02:00.0.bin: firmware_loading_store: map pages failed
[ 20.436963] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[ 20.447353] ath10k_pci 0000:02:00.0: Falling back to user helper
[ 20.457536] firmware ath10k!cal-pci-0000:02:00.0.bin: firmware_loading_store: map pages failed
[ 20.466370] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 20.477111] ath10k_pci 0000:02:00.0: Falling back to user helper
[ 20.487218] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 20.516585] ath10k_pci 0000:02:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 20.526560] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 20.538197] ath10k_pci 0000:02:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 4c56a386
[ 21.787245] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id 0:31 crc32 dd6d039c
[ 24.367567] ath10k_pci 0000:02:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
[ 24.461807] ath: EEPROM regdomain: 0x0
[ 24.461809] ath: EEPROM indicates default country code should be used
[ 24.461811] ath: doing EEPROM country->regdmn map search
[ 24.461815] ath: country maps to regdmn code: 0x3a
[ 24.461817] ath: Country alpha2 being used: US
[ 24.461818] ath: Regpair used: 0x3a
I don´t know what am I doing wrong and I am feeling totally lost… 