No signal on WAN port --> Turris doesn't recognize modem - Help

Hi everyone
So I got my Turris Omnia yesterday and I’m a bit lost to be honest. I’m really sorry if this has been asked to death but I couldn’t find anything relating exactly to this for some reason.

A few infos:
ISP: UPC Cablecom
Turris OS Version: 3.2.1
Kernel: 4.4.13

First, I did a factory reset of the Turris router. I previously changed into modem-mode on my ISP-issued router and according to customer support of the ISP it was indeed changed to modem-mode (They also made sure my connection was IPv4 only because apparently if it’s set to IPv6, Modem-Mode doesn’t work). At this point I had disconnected all devices from the modem. I started up the Turris and connected ethernet from a LAN port on modem to the WAN port on the Turris.

I started going through the wizard. Right away the WAN port didn’t get any signal. It was set to DHCP which should be correct. I thought about updating to the latest version of Turris OS but I couln’t really find the documentation for it as updates shouldn’t be an issue if get actually get a connection. Maybe it would help if I could flash the firmware via USB. How would that work exactly?
Any pointers on what could be wrong exactly?

Ok, so below you’ll find the system log. Sorry, I just copied everything in. Didn’t really know what to look for. I’ll gladly give more information if I have somewhere to start. I guess I shouldn’t have expected it to just work. but oh well :slight_smile: Thanks for any help.

2018-03-07T19:37:53+01:00 notice syslog-ng[2682]: syslog-ng starting up; version='3.0.9'
2018-03-07T19:37:53+01:00 info kernel[]: [    5.536847] Freeing unused kernel memory: 260K (c0635000 - c0676000)
2018-03-07T19:37:53+01:00 info kernel[]:    5.590889] init: Console is alive
2018-03-07T19:37:53+01:00 info kernel[]: [    5.970203] usbcore: registered new interface driver usbfs
2018-03-07T19:37:53+01:00 info kernel[]: [    5.975756] usbcore: registered new interface driver hub
2018-03-07T19:37:53+01:00 info kernel[]: [    5.981122] usbcore: registered new device driver usb
2018-03-07T19:37:53+01:00 info kernel[]: [    5.988599] exFAT: Version 1.2.9
2018-03-07T19:37:53+01:00 info kernel[]: [    6.010883] JFS: nTxBlock = 8192, nTxLock = 65536
2018-03-07T19:37:53+01:00 info kernel[]: [    6.086679] SGI XFS with security attributes, no debug enabled
2018-03-07T19:37:53+01:00 notice kernel[]: [    6.097476] SCSI subsystem initialized
2018-03-07T19:37:53+01:00 debug kernel[]: [    6.108324] libata version 3.00 loaded.
2018-03-07T19:37:58+01:00 info kernel[]: [    6.111618] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
2018-03-07T19:37:58+01:00 info kernel[]: [    6.118487] ehci-platform: EHCI generic platform driver
2018-03-07T19:37:58+01:00 info kernel[]: [    6.124166] ehci-orion: EHCI orion driver
2018-03-07T19:37:58+01:00 info kernel[]: [    6.128286] orion-ehci f1058000.usb: EHCI Host Controller
2018-03-07T19:37:58+01:00 info kernel[]: [    6.133734] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
2018-03-07T19:37:58+01:00 info kernel[]: [    6.141399] orion-ehci f1058000.usb: irq 39, io mem 0xf1058000
2018-03-07T19:37:58+01:00 info kernel[]: [    6.160701] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
2018-03-07T19:37:58+01:00 info kernel[]: [    6.166887] hub 1-0:1.0: USB hub found
2018-03-07T19:37:58+01:00 info kernel[]: [    6.170660] hub 1-0:1.0: 1 port detected
2018-03-07T19:37:58+01:00 info kernel[]: [    6.175807] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
2018-03-07T19:37:58+01:00 info kernel[]: [    6.184898] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
2018-03-07T19:37:58+01:00 info kernel[]: [    6.194337] scsi host0: ahci-mvebu
2018-03-07T19:37:58+01:00 info kernel[]: [    6.197919] scsi host1: ahci-mvebu
2018-03-07T19:37:58+01:00 info kernel[]: [    6.201449] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 44
2018-03-07T19:37:58+01:00 info kernel[]: [    6.209385] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 44
2018-03-07T19:37:58+01:00 info kernel[]: [    6.560699] ata1: SATA link down (SStatus 0 SControl 300)
2018-03-07T19:37:58+01:00 info kernel[]: [    6.566128] ata2: SATA link down (SStatus 0 SControl 300)
2018-03-07T19:37:58+01:00 info kernel[]: [    6.572604] uhci_hcd: USB Universal Host Controller Interface driver
2018-03-07T19:37:58+01:00 info kernel[]: [    6.579584] orion_wdt: Initial timeout 171 sec
2018-03-07T19:37:58+01:00 info kernel[]: [    6.588058] xhci-hcd f10f0000.usb3: xHCI Host Controller
2018-03-07T19:37:58+01:00 info kernel[]: [    6.593413] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
2018-03-07T19:37:58+01:00 info kernel[]: [    6.601018] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
2018-03-07T19:37:58+01:00 info kernel[]: [    6.609581] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
2018-03-07T19:37:58+01:00 info kernel[]: [    6.615605] hub 2-0:1.0: USB hub found
2018-03-07T19:37:58+01:00 info kernel[]: [    6.619376] hub 2-0:1.0: 1 port detected
2018-03-07T19:37:58+01:00 info kernel[]: [    6.623415] xhci-hcd f10f0000.usb3: xHCI Host Controller
2018-03-07T19:37:58+01:00 info kernel[]: [    6.628742] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
2018-03-07T19:37:58+01:00 info kernel[]: [    6.636299] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
2018-03-07T19:37:58+01:00 info kernel[]: [    6.644630] hub 3-0:1.0: USB hub found
2018-03-07T19:37:58+01:00 info kernel[]: [    6.648400] hub 3-0:1.0: 1 port detected
2018-03-07T19:37:58+01:00 info kernel[]: [    6.652486] xhci-hcd f10f8000.usb3: xHCI Host Controller
2018-03-07T19:37:58+01:00 info kernel[]: [    6.657817] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
2018-03-07T19:37:58+01:00 info kernel[]: [    6.665415] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
2018-03-07T19:37:58+01:00 info kernel[]: [    6.673981] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
2018-03-07T19:37:58+01:00 info kernel[]: [    6.679964] hub 4-0:1.0: USB hub found
2018-03-07T19:37:58+01:00 info kernel[]: [    6.683743] hub 4-0:1.0: 1 port detected
2018-03-07T19:37:58+01:00 info kernel[]: [    6.687764] xhci-hcd f10f8000.usb3: xHCI Host Controller
2018-03-07T19:37:58+01:00 info kernel[]: [    6.693099] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
2018-03-07T19:37:58+01:00 info kernel[]: [    6.700627] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
2018-03-07T19:37:58+01:00 info kernel[]: [    6.708952] hub 5-0:1.0: USB hub found
2018-03-07T19:37:58+01:00 info kernel[]: [    6.712726] hub 5-0:1.0: 1 port detected
2018-03-07T19:37:58+01:00 info kernel[]: [    6.718118] usbcore: registered new interface driver usb-storage
2018-03-07T19:37:58+01:00 info kernel[]:    7.610843] init: - preinit -
2018-03-07T19:37:58+01:00 notice kernel[]:   10.659686] mount_root: mounting /dev/root
2018-03-07T19:37:58+01:00 info kernel[]: [   10.715346] BTRFS info (device mmcblk0p1): disk space caching is enabled
2018-03-07T19:37:58+01:00 info kernel[]:   10.722583] mount_root: loading kmods from internal overlay
2018-03-07T19:37:58+01:00 info kernel[]:   10.934738] block: attempting to load /etc/config/fstab
2018-03-07T19:37:58+01:00 err kernel[]:   10.940412] block: unable to load configuration (fstab: Entry not found)
2018-03-07T19:37:58+01:00 err kernel[]:   10.947158] block: no usable configuration
2018-03-07T19:37:58+01:00 info kernel[]:   10.953804] procd: - early -
2018-03-07T19:37:58+01:00 notice kernel[]: [   11.055099] random: jshn urandom read with 34 bits of entropy available
2018-03-07T19:37:58+01:00 info kernel[]:   11.523195] procd: - watchdog -
2018-03-07T19:37:58+01:00 info kernel[]:   11.526579] procd: - ubus -
2018-03-07T19:37:58+01:00 info kernel[]:   12.531926] procd: - init -
2018-03-07T19:37:58+01:00 info kernel[]: [   12.591387] marvell-cesa f1090000.crypto: CESA device successfully registered
2018-03-07T19:37:58+01:00 info kernel[]: [   12.602441] NET: Registered protocol family 38
2018-03-07T19:37:58+01:00 info kernel[]: [   12.621135] md: linear personality registered for level -1
2018-03-07T19:37:58+01:00 info kernel[]: [   12.627036] md: raid0 personality registered for level 0
2018-03-07T19:37:58+01:00 info kernel[]: [   12.633186] md: raid1 personality registered for level 1
2018-03-07T19:37:58+01:00 info kernel[]: [   12.639492] md: raid10 personality registered for level 10
2018-03-07T19:37:58+01:00 info kernel[]: [   12.645413] async_tx: api initialized (async)
2018-03-07T19:37:58+01:00 info kernel[]: [   12.653375] md: raid6 personality registered for level 6
2018-03-07T19:37:58+01:00 info kernel[]: [   12.658702] md: raid5 personality registered for level 5
2018-03-07T19:37:58+01:00 info kernel[]: [   12.664050] md: raid4 personality registered for level 4
2018-03-07T19:37:58+01:00 notice kernel[]: [   12.671714] FS-Cache: Loaded
2018-03-07T19:37:58+01:00 info kernel[]: [   12.675218] md: multipath personality registered for level -4
2018-03-07T19:37:58+01:00 info kernel[]: [   12.682427] NET: Registered protocol family 8
2018-03-07T19:37:58+01:00 info kernel[]: [   12.686795] NET: Registered protocol family 20
2018-03-07T19:37:58+01:00 info kernel[]: [   12.696025] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
2018-03-07T19:37:58+01:00 notice kernel[]: [   12.707082] Key type dns_resolver registered
2018-03-07T19:37:58+01:00 info kernel[]: [   12.715121] NET: Registered protocol family 33
2018-03-07T19:37:58+01:00 notice kernel[]: [   12.719580] Key type rxrpc registered
2018-03-07T19:37:58+01:00 notice kernel[]: [   12.723262] Key type rxrpc_s registered
2018-03-07T19:37:58+01:00 info kernel[]: [   12.731270] kAFS: Red Hat AFS client v0.1 registering.
2018-03-07T19:37:58+01:00 notice kernel[]: [   12.736460] FS-Cache: Netfs 'afs' registered for caching
2018-03-07T19:37:58+01:00 info kernel[]: [   12.778993] RPC: Registered named UNIX socket transport module.
2018-03-07T19:37:58+01:00 info kernel[]: [   12.784949] RPC: Registered udp transport module.
2018-03-07T19:37:58+01:00 info kernel[]: [   12.789662] RPC: Registered tcp transport module.
2018-03-07T19:37:58+01:00 info kernel[]: [   12.794386] RPC: Registered tcp NFSv4.1 backchannel transport module.
2018-03-07T19:37:58+01:00 info kernel[]: [   12.805969] ntfs: driver 2.1.32 [Flags: R/O MODULE].
2018-03-07T19:37:58+01:00 notice kernel[]: [   12.816534] RxRPC: Registered security type 2 'rxkad'
2018-03-07T19:37:58+01:00 info kernel[]: [   12.834076] tun: Universal TUN/TAP device driver, 1.6
2018-03-07T19:37:58+01:00 info kernel[]: [   12.839144] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
2018-03-07T19:37:58+01:00 info kernel[]: [   12.849681] sit: IPv6 over IPv4 tunneling driver
2018-03-07T19:37:58+01:00 info kernel[]: [   12.855562] gre: GRE over IPv4 demultiplexor driver
2018-03-07T19:37:58+01:00 info kernel[]: [   12.861231] ip_gre: GRE over IPv4 tunneling driver
2018-03-07T19:37:58+01:00 info kernel[]: [   12.883016] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
2018-03-07T19:37:58+01:00 info kernel[]: [   12.891615] PPP generic driver version 2.4.2
2018-03-07T19:37:58+01:00 info kernel[]: [   12.898295] ip6_tables: (C) 2000-2006 Netfilter Core Team
2018-03-07T19:37:58+01:00 info kernel[]: [   12.907182] cryptodev: driver 1.8 loaded.
2018-03-07T19:37:58+01:00 info kernel[]: [   12.914406] Loading modules backported from Linux version master-2015-12-03-0-g1677f62
2018-03-07T19:37:58+01:00 info kernel[]: [   12.922361] Backport generated by backports.git backports-20151120-0-g906a6b3
2018-03-07T19:37:58+01:00 info kernel[]: [   12.945354] cfg80211: World regulatory domain updated:
2018-03-07T19:37:58+01:00 info kernel[]: [   12.950518] cfg80211:  DFS Master region: unset
2018-03-07T19:37:58+01:00 info kernel[]: [   12.954902] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
2018-03-07T19:37:58+01:00 info kernel[]: [   12.964696] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
2018-03-07T19:37:58+01:00 info kernel[]: [   12.972727] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
2018-03-07T19:37:58+01:00 info kernel[]: [   12.982147] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
2018-03-07T19:37:58+01:00 info kernel[]: [   12.990171] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
2018-03-07T19:37:58+01:00 info kernel[]: [   12.999689] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
2018-03-07T19:37:58+01:00 info kernel[]: [   13.009204] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
2018-03-07T19:37:58+01:00 info kernel[]: [   13.017320] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
2018-03-07T19:37:58+01:00 info kernel[]: [   13.025346] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
2018-03-07T19:37:58+01:00 info kernel[]: [   13.051738] pci 0000:00:02.0: enabling device (0140 -> 0142)
2018-03-07T19:37:58+01:00 info kernel[]: [   13.057743] ath10k_pci 0000:02:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
2018-03-07T19:37:58+01:00 warning kernel[]: [   13.234184] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
2018-03-07T19:37:58+01:00 warning kernel[]: [   13.244575] ath10k_pci 0000:02:00.0: Falling back to user helper
2018-03-07T19:37:58+01:00 err kernel[]: [   13.254439] firmware ath10k!cal-pci-0000:02:00.0.bin: firmware_loading_store: map pages failed
2018-03-07T19:37:58+01:00 info kernel[]: [   13.271179] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
2018-03-07T19:37:58+01:00 info kernel[]: [   13.280425] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
2018-03-07T19:37:58+01:00 info kernel[]: [   13.289963] ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70-2 api 5 features no-p2p crc32 b722ec09
2018-03-07T19:37:58+01:00 warning kernel[]: [   13.339075] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
2018-03-07T19:37:58+01:00 warning kernel[]: [   13.349548] ath10k_pci 0000:02:00.0: Falling back to user helper
2018-03-07T19:37:58+01:00 err kernel[]: [   13.359257] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
2018-03-07T19:37:58+01:00 info kernel[]: [   13.368233] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
2018-03-07T19:37:58+01:00 info kernel[]: [   14.497217] ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
2018-03-07T19:37:58+01:00 debug kernel[]: [   14.581874] ath: EEPROM regdomain: 0x0
2018-03-07T19:37:58+01:00 debug kernel[]: [   14.581880] ath: EEPROM indicates default country code should be used
2018-03-07T19:37:58+01:00 debug kernel[]: [   14.581883] ath: doing EEPROM country->regdmn map search
2018-03-07T19:37:58+01:00 debug kernel[]: [   14.581887] ath: country maps to regdmn code: 0x3a
2018-03-07T19:37:58+01:00 debug kernel[]: [   14.581890] ath: Country alpha2 being used: US
2018-03-07T19:37:58+01:00 debug kernel[]: [   14.581892] ath: Regpair used: 0x3a
2018-03-07T19:37:58+01:00 info kernel[]: [   14.584695] cfg80211: Regulatory domain changed to country: US
2018-03-07T19:37:58+01:00 info kernel[]: [   14.589492] u32 classifier
2018-03-07T19:37:58+01:00 info kernel[]: [   14.589493]     input device check on
2018-03-07T19:37:58+01:00 info kernel[]: [   14.589493]     Actions configured
2018-03-07T19:37:58+01:00 info kernel[]: [   14.600385] cfg80211:  DFS Master region: FCC
2018-03-07T19:37:58+01:00 info kernel[]: [   14.604594] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
2018-03-07T19:37:58+01:00 info kernel[]: [   14.614377] cfg80211:   (2402000 KHz - 2467000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
2018-03-07T19:37:58+01:00 info kernel[]: [   14.622407] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
2018-03-07T19:37:58+01:00 info kernel[]: [   14.631916] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
2018-03-07T19:37:58+01:00 info kernel[]: [   14.641424] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
2018-03-07T19:37:58+01:00 info kernel[]: [   14.649533] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
2018-03-07T19:37:58+01:00 info kernel[]: [   14.657561] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
2018-03-07T19:37:58+01:00 info kernel[]: [   14.665958] Mirror/redirect action on
2018-03-07T19:37:58+01:00 info kernel[]: [   14.674842] netem: version 1.3
2018-03-07T19:37:58+01:00 info kernel[]: [   14.685383] fuse init (API version 7.23)
2018-03-07T19:37:58+01:00 info kernel[]: [   14.700976] usbcore: registered new interface driver cdc_wdm
2018-03-07T19:37:58+01:00 info kernel[]: [   14.709877] Ebtables v2.0 registered
2018-03-07T19:37:58+01:00 info kernel[]: [   14.714852] ip_tables: (C) 2000-2006 Netfilter Core Team
2018-03-07T19:37:58+01:00 info kernel[]: [   14.726856] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
2018-03-07T19:37:58+01:00 info kernel[]: [   14.884231] Netfilter messages via NETLINK v0.30.
2018-03-07T19:37:58+01:00 info kernel[]: [   14.889796] PPP MPPE Compression module registered
2018-03-07T19:37:58+01:00 info kernel[]: [   14.895176] NET: Registered protocol family 24
2018-03-07T19:37:58+01:00 info kernel[]: [   14.903225] usbcore: registered new interface driver ums-alauda
2018-03-07T19:37:58+01:00 info kernel[]: [   14.910003] usbcore: registered new interface driver ums-cypress
2018-03-07T19:37:58+01:00 info kernel[]: [   14.916929] usbcore: registered new interface driver ums-datafab
2018-03-07T19:37:58+01:00 info kernel[]: [   14.923746] usbcore: registered new interface driver ums-freecom
2018-03-07T19:37:58+01:00 info kernel[]: [   14.930614] usbcore: registered new interface driver ums-isd200
2018-03-07T19:37:58+01:00 info kernel[]: [   14.937529] usbcore: registered new interface driver ums-jumpshot
2018-03-07T19:37:58+01:00 info kernel[]: [   14.944485] usbcore: registered new interface driver ums-karma
2018-03-07T19:37:58+01:00 info kernel[]: [   14.951516] usbcore: registered new interface driver ums-sddr09
2018-03-07T19:37:58+01:00 info kernel[]: [   14.958339] usbcore: registered new interface driver ums-sddr55
2018-03-07T19:37:58+01:00 info kernel[]: [   14.965275] usbcore: registered new interface driver ums-usbat
2018-03-07T19:37:58+01:00 info kernel[]: [   14.977186] usbcore: registered new interface driver usbserial
2018-03-07T19:37:58+01:00 info kernel[]: [   14.983083] usbcore: registered new interface driver usbserial_generic
2018-03-07T19:37:58+01:00 info kernel[]: [   14.989650] usbserial: USB Serial support registered for generic
2018-03-07T19:37:58+01:00 info kernel[]: [   15.000302] xt_time: kernel timezone is -0000
2018-03-07T19:37:58+01:00 info kernel[]: [   15.018518] usbcore: registered new interface driver cdc_ether
2018-03-07T19:37:58+01:00 info kernel[]: [   15.028797] ctnetlink v0.93: registering with nfnetlink.
2018-03-07T19:37:58+01:00 info kernel[]: [   15.037800] usbcore: registered new interface driver qmi_wwan
2018-03-07T19:37:58+01:00 info kernel[]: [   15.044721] usbcore: registered new interface driver rndis_host
2018-03-07T19:37:58+01:00 info kernel[]: [   15.059148] pci 0000:00:01.0: enabling device (0140 -> 0142)
2018-03-07T19:37:58+01:00 debug kernel[]: [   15.151732] ath: EEPROM regdomain: 0x0
2018-03-07T19:37:58+01:00 debug kernel[]: [   15.151736] ath: EEPROM indicates default country code should be used
2018-03-07T19:37:58+01:00 debug kernel[]: [   15.151739] ath: doing EEPROM country->regdmn map search
2018-03-07T19:37:58+01:00 debug kernel[]: [   15.151743] ath: country maps to regdmn code: 0x3a
2018-03-07T19:37:58+01:00 debug kernel[]: [   15.151746] ath: Country alpha2 being used: US
2018-03-07T19:37:58+01:00 debug kernel[]: [   15.151749] ath: Regpair used: 0x3a
2018-03-07T19:37:58+01:00 debug kernel[]: [   15.163615] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
2018-03-07T19:37:58+01:00 info kernel[]: [   15.164631] ieee80211 phy1: Atheros AR9287 Rev:2 mem=0xf1cc0000, irq=108
2018-03-07T19:37:58+01:00 info kernel[]: [   15.172981] usbcore: registered new interface driver option
2018-03-07T19:37:58+01:00 info kernel[]: [   15.178617] usbserial: USB Serial support registered for GSM modem (1-port)
2018-03-07T19:37:58+01:00 info kernel[]: [   15.186354] usbcore: registered new interface driver qcserial
2018-03-07T19:37:58+01:00 info kernel[]: [   15.192170] usbserial: USB Serial support registered for Qualcomm USB modem
2018-03-07T19:37:58+01:00 notice kernel[]: [   20.784902] random: nonblocking pool is initialized
2018-03-07T19:37:58+01:00 info kernel[]: [   29.872601] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
2018-03-07T19:37:58+01:00 info kernel[]: [   29.952377] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
2018-03-07T19:37:58+01:00 info kernel[]: [   29.955959] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
2018-03-07T19:37:58+01:00 info kernel[]: [   31.563752] device eth0 entered promiscuous mode
2018-03-07T19:37:58+01:00 info kernel[]: [   31.564672] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
2018-03-07T19:37:58+01:00 info kernel[]: [   31.586475] device eth2 entered promiscuous mode
2018-03-07T19:37:58+01:00 info kernel[]: [   31.602409] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
2018-03-07T19:37:58+01:00 info kernel[]: [   33.335891] device eth0 left promiscuous mode
2018-03-07T19:37:58+01:00 info kernel[]: [   33.335926] br-lan: port 1(eth0) entered disabled state
2018-03-07T19:37:58+01:00 info kernel[]: [   33.342384] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
2018-03-07T19:37:58+01:00 info kernel[]: [   33.343874] device eth2 left promiscuous mode
2018-03-07T19:37:58+01:00 info kernel[]: [   33.343906] br-lan: port 2(eth2) entered disabled state
2018-03-07T19:37:58+01:00 info kernel[]: [   33.350391] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
2018-03-07T19:37:58+01:00 info kernel[]: [   35.000903] device eth0 entered promiscuous mode
2018-03-07T19:37:58+01:00 info kernel[]: [   35.001787] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
2018-03-07T19:37:58+01:00 info kernel[]: [   35.011547] device eth2 entered promiscuous mode
2018-03-07T19:37:58+01:00 info kernel[]: [   35.017220] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
2018-03-07T19:37:58+01:00 info kernel[]: [   36.990715] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
2018-03-07T19:37:58+01:00 info kernel[]: [   36.990742] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:37:58+01:00 info kernel[]: [   36.990764] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:37:58+01:00 info kernel[]: [   36.990802] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
2018-03-07T19:37:58+01:00 info kernel[]: [   37.000756] mvneta f1070000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
2018-03-07T19:37:58+01:00 info kernel[]: [   37.000772] br-lan: port 2(eth2) entered forwarding state
2018-03-07T19:37:58+01:00 info kernel[]: [   37.000788] br-lan: port 2(eth2) entered forwarding state
2018-03-07T19:37:58+01:00 info kernel[]: [   38.990697] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:37:58+01:00 info kernel[]: [   39.000700] br-lan: port 2(eth2) entered forwarding state
2018-03-07T18:37:58+01:00 err ntpdate[2686]: name server cannot be used: Try again (-3)
2018-03-07T18:38:03+01:00 err ntpdate[2695]: name server cannot be used: Try again (-3)
2018-03-07T18:38:08+01:00 err ntpdate[2696]: name server cannot be used: Try again (-3)
2018-03-07T18:38:08+01:00 emerg sfpswitch.py[1814]: Called /etc/init.d/kresd start
2018-03-07T18:38:09+01:00 crit mountd[2755]: Starting OpenWrt (auto)mountd V1
2018-03-07T18:38:09+01:00 crit mountd[2755]: trying to mount /tmp/run/mountd/ as the autofs root
2018-03-07T18:38:10+01:00 debug updater[2775]: src/lib/journal.c:123 (journal_open): Opening journal
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: DEBUG:src/lib/journal.c:123 (journal_open):Opening journal
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: line not found
2018-03-07T18:38:10+01:00 debug updater[2775]: src/lib/interpreter.c:104 (interpreter_error_result): 
Stack Traceback
===============
(2) Lua function '?' at line 64 of chunk '"logging"]'
	Local variables:
	 err = string: "[string \"transaction\"]:325: No journal to recover"
	 err2string = Lua function '?' (defined at line 45 of chunk "logging"])
	 msg = string: "\
[string \"transaction\"]:325: No journal to recover"
	 (*temporary) = table: 0x2bb090  {msg:
[string "transaction"]:325: No journal to recover}
(3)  C function 'function: 0x2b8e00'
(4) field C function 'recover'
(5) Lua global 'recover' at line 325 of chunk '"transaction"]'
	Local variables:
	 run_state = table: 0x818d0  {initialized:true, init:function: 0x81900, lfile:userdata: 0xd0568, release:function: 0xaed20 (more...)}
(6) Lua function '?' at line 386 of chunk '"transaction"]'
	Local variables:
	 (*temporary) = Lua function '?' (defined at line 352 of chunk "transaction"])
2018-03-07T18:38:10+01:00 crit updater[2775]: src/opkg-trans/main.c:95 (main): 
[string "transaction"]:325: No journal to recover
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: DEBUG:src/lib/interpreter.c:104 (interpreter_error_result):
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: Stack Traceback
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: ===============
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: (2) Lua function '?' at line 64 of chunk '"logging"]'
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: 	Local variables:
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: 	 err = string: "[string \"transaction\"]:325: No journal to recover"
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: 	 err2string = Lua function '?' (defined at line 45 of chunk "logging"])
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: 	 msg = string: "\
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: [string \"transaction\"]:325: No journal to recover"
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: 	 (*temporary) = table: 0x2bb090  {msg:
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: [string "transaction"]:325: No journal to recover}
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: (4) field C function 'recover'
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: (5) Lua global 'recover' at line 325 of chunk '"transaction"]'
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: 	Local variables:
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: 	 run_state = table: 0x818d0  {initialized:true, init:function: 0x81900, lfile:userdata: 0xd0568, release:function: 0xaed20 (more...)}
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: (6) Lua function '?' at line 386 of chunk '"transaction"]'
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: 	Local variables:
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: 	 (*temporary) = Lua function '?' (defined at line 352 of chunk "transaction"])
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: 
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: [31;1mDIE[0m:src/opkg-trans/main.c:95 (main):
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: [string "transaction"]:325: No journal to recover
2018-03-07T18:38:10+01:00 emerg sfpswitch.py[1814]: Aborted
2018-03-07T18:38:10+01:00 info cron[2781]: (CRON) STARTUP (V5.0)
2018-03-07T18:38:10+01:00 info cron[2781]: (root) BAD FILE MODE (crontabs/root)
2018-03-07T18:38:10+01:00 info smartd[2789]: smartd 6.5 2016-05-07 r4318 [armv7l-linux-4.4.13-05df79f63527051ea0071350f86faf76-7] (localbuild)
2018-03-07T18:38:10+01:00 info smartd[2789]: Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
2018-03-07T18:38:10+01:00 info smartd[2789]: Opened configuration file /etc/smartd.conf
2018-03-07T18:38:10+01:00 info smartd[2789]: Configuration file /etc/smartd.conf parsed.
2018-03-07T18:38:10+01:00 info smartd[2789]: Device: /dev/hdb, open() failed: No such device
2018-03-07T18:38:10+01:00 info smartd[2789]: Monitoring 0 ATA/SATA, 0 SCSI/SAS and 0 NVMe devices
2018-03-07T18:38:10+01:00 info smartd[2792]: smartd has fork()ed into background mode. New PID=2792.
2018-03-07T18:38:11+01:00 warning []: Unable to use //tmp//yin2yang.xsl (No such file or directory).
2018-03-07T18:38:11+01:00 warning []: YANG format data models will not be available via get-schema.
2018-03-07T18:38:11+01:00 warning []: Unable to get tty (Not a tty) to get the client's hostname (session 2797).
2018-03-07T18:38:12+01:00 emerg sfpswitch.py[1814]: cat: can't open '/etc/rainbow.magic': No such file or directory
2018-03-07T18:38:12+01:00 emerg sfpswitch.py[1814]: Specify intensity level
2018-03-07T18:38:12+01:00 emerg sfpswitch.py[1814]: setting up led Auto-configuration for PCI1
2018-03-07T18:38:12+01:00 emerg sfpswitch.py[1814]: setting up led Auto-configuration for PCI2
2018-03-07T18:38:12+01:00 emerg sfpswitch.py[1814]: setting up led Auto-configuration for PCI3
2018-03-07T18:38:12+01:00 emerg turris[]: Router Turris successfully started.
2018-03-07T18:38:12+01:00 info procd[]: - init complete -
2018-03-07T18:39:01+01:00 info cron[2856]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:37:49+01:00 info dnsmasq[2626]: started, version 2.73 DNS disabled
2018-03-07T19:39:14+01:00 warning dnsmasq[2626]: overflow: 5 log entries lost
2018-03-07T19:39:14+01:00 info dnsmasq-dhcp[2626]: DHCPNAK(br-lan) 192.168.0.185 b8:ac:6f:59:f1:76 wrong network
2018-03-07T18:39:14+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T19:39:15+01:00 warning odhcpd[]: Last message 'DHCPV6 SOLICIT IA_NA' repeated 1 times, supressed by syslog-ng on turris
2018-03-07T18:39:15+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T19:39:17+01:00 info dnsmasq-dhcp[2626]: DHCPDISCOVER(br-lan) b8:ac:6f:59:f1:76 
2018-03-07T19:39:17+01:00 info dnsmasq-dhcp[2626]: DHCPOFFER(br-lan) 192.168.1.242 b8:ac:6f:59:f1:76 
2018-03-07T19:39:17+01:00 info dnsmasq-dhcp[2626]: read /etc/ethers - 0 addresses
2018-03-07T19:39:17+01:00 info dnsmasq-dhcp[2626]: DHCPREQUEST(br-lan) 192.168.1.242 b8:ac:6f:59:f1:76 
2018-03-07T19:39:17+01:00 info dnsmasq-dhcp[2626]: DHCPACK(br-lan) 192.168.1.242 b8:ac:6f:59:f1:76 D4CHSTOCK
2018-03-07T18:39:17+01:00 warning odhcpd[1991]: DHCPV6 CONFIRM IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: not on-link fdb8:3854:194d::81d/128 
2018-03-07T18:39:17+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T19:39:17+01:00 info dnsmasq-dhcp[2626]: read /etc/ethers - 0 addresses
2018-03-07T18:39:18+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T19:39:18+01:00 info dnsmasq-dhcp[2626]: read /etc/ethers - 0 addresses
2018-03-07T18:40:01+01:00 info cron[2904]: (root) CMD (   /usr/bin/notifier)
2018-03-07T18:40:01+01:00 info cron[2906]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T18:40:01+01:00 info cron[2910]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:40:01+01:00 info cron[2908]: (root) CMD (nethist_stats.lua)
2018-03-07T18:40:02+01:00 info passwd[]: Password for root changed by root
2018-03-07T18:40:02+01:00 warning []: Missing message-id in rpc-reply.
2018-03-07T18:40:19+01:00 notice netifd[]: Interface 'lan' is now down
2018-03-07T19:40:19+01:00 info kernel[]: [  188.763245] br-lan: port 2(eth2) entered disabled state
2018-03-07T19:40:19+01:00 info kernel[]: [  188.763270] br-lan: port 1(eth0) entered disabled state
2018-03-07T19:40:19+01:00 info kernel[]: [  188.767592] device eth0 left promiscuous mode
2018-03-07T19:40:19+01:00 info kernel[]: [  188.767631] br-lan: port 1(eth0) entered disabled state
2018-03-07T19:40:19+01:00 info kernel[]: [  188.775031] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
2018-03-07T19:40:19+01:00 info kernel[]: [  188.776601] device eth2 left promiscuous mode
2018-03-07T19:40:19+01:00 info kernel[]: [  188.776644] br-lan: port 2(eth2) entered disabled state
2018-03-07T19:40:19+01:00 info kernel[]: [  188.783794] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
2018-03-07T18:40:19+01:00 notice netifd[]: Interface 'lan' is disabled
2018-03-07T18:40:19+01:00 notice netifd[]: Network device 'eth2' link is down
2018-03-07T18:40:19+01:00 notice netifd[]: Network device 'eth0' link is down
2018-03-07T18:40:19+01:00 notice netifd[]: Bridge 'br-lan' link is down
2018-03-07T18:40:19+01:00 notice netifd[]: Interface 'lan' has link connectivity loss
2018-03-07T18:40:19+01:00 notice netifd[]: Interface 'loopback' is now down
2018-03-07T18:40:19+01:00 notice netifd[]: Interface 'loopback' is disabled
2018-03-07T18:40:19+01:00 notice netifd[]: Network device 'lo' link is down
2018-03-07T18:40:19+01:00 notice netifd[]: Interface 'loopback' has link connectivity loss
2018-03-07T18:40:19+01:00 notice netifd[]: Interface 'wan' is disabled
2018-03-07T18:40:19+01:00 notice netifd[]: Interface 'wan6' is disabled
2018-03-07T18:40:20+01:00 emerg procd[]: 'radio0' is disabled
2018-03-07T18:40:20+01:00 emerg procd[]: 'radio1' is disabled
2018-03-07T18:40:20+01:00 emerg procd[]: 'radio0' is disabled
2018-03-07T18:40:20+01:00 emerg procd[]: 'radio1' is disabled
2018-03-07T18:40:20+01:00 notice netifd[]: Interface 'lan' is enabled
2018-03-07T19:40:20+01:00 info kernel[]: [  190.426814] device eth0 entered promiscuous mode
2018-03-07T19:40:20+01:00 info kernel[]: [  190.428044] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
2018-03-07T18:40:20+01:00 notice netifd[]: Interface 'lan' is setting up now
2018-03-07T18:40:20+01:00 notice netifd[]: Interface 'lan' is now up
2018-03-07T18:40:20+01:00 notice netifd[]: Interface 'loopback' is enabled
2018-03-07T19:40:20+01:00 info kernel[]: [  190.437015] device eth2 entered promiscuous mode
2018-03-07T18:40:20+01:00 notice netifd[]: Interface 'loopback' is setting up now
2018-03-07T18:40:20+01:00 notice netifd[]: Interface 'loopback' is now up
2018-03-07T18:40:20+01:00 notice netifd[]: Interface 'wan' is enabled
2018-03-07T19:40:20+01:00 info kernel[]: [  190.444497] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
2018-03-07T18:40:20+01:00 notice netifd[]: Network device 'lo' link is up
2018-03-07T18:40:20+01:00 notice netifd[]: Interface 'loopback' has link connectivity 
2018-03-07T18:40:20+01:00 notice firewall[]: Reloading firewall due to ifup of lan (br-lan)
2018-03-07T18:40:22+01:00 notice netifd[]: Network device 'eth0' link is up
2018-03-07T18:40:22+01:00 notice netifd[]: Bridge 'br-lan' link is up
2018-03-07T18:40:22+01:00 notice netifd[]: Interface 'lan' has link connectivity 
2018-03-07T19:40:22+01:00 info kernel[]: [  192.420716] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
2018-03-07T19:40:22+01:00 info kernel[]: [  192.420745] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:40:22+01:00 info kernel[]: [  192.420768] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:40:22+01:00 info kernel[]: [  192.420807] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
2018-03-07T19:40:22+01:00 info kernel[]: [  192.430752] mvneta f1070000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
2018-03-07T19:40:22+01:00 info kernel[]: [  192.430774] br-lan: port 2(eth2) entered forwarding state
2018-03-07T18:40:22+01:00 notice netifd[]: Network device 'eth2' link is up
2018-03-07T19:40:22+01:00 info kernel[]: [  192.430794] br-lan: port 2(eth2) entered forwarding state
2018-03-07T19:40:24+01:00 info kernel[]: [  194.420698] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:40:24+01:00 info kernel[]: [  194.430702] br-lan: port 2(eth2) entered forwarding state
2018-03-07T18:40:38+01:00 warning []: Missing message-id in rpc-reply.
2018-03-07T18:40:58+01:00 warning []: Missing message-id in rpc-reply.
2018-03-07T18:41:01+01:00 info cron[3771]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:41:26+01:00 warning []: Missing message-id in rpc-reply.
2018-03-07T18:41:41+01:00 warning []: Missing message-id in rpc-reply.
2018-03-07T18:41:47+01:00 crit updater[3863]: src/pkgupdate/main.c:197 (main): 
unreachable: /tmp/crl.pem: No such file or directory
2018-03-07T18:42:01+01:00 info cron[3935]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:42:01+01:00 info cron[3934]: (root) CMD (nethist_stats.lua)
2018-03-07T18:43:01+01:00 info cron[3975]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:43:12+01:00 warning []: Unable to use //tmp//yin2yang.xsl (No such file or directory).
2018-03-07T18:43:12+01:00 warning []: YANG format data models will not be available via get-schema.
2018-03-07T18:43:12+01:00 warning []: Unable to get tty (Not a tty) to get the client's hostname (session 3987).
2018-03-07T18:43:12+01:00 notice netifd[]: Interface 'lan' is now down
2018-03-07T19:43:12+01:00 info kernel[]: [  362.932967] br-lan: port 2(eth2) entered disabled state
2018-03-07T19:43:12+01:00 info kernel[]: [  362.932992] br-lan: port 1(eth0) entered disabled state
2018-03-07T19:43:12+01:00 info kernel[]: [  362.937209] device eth0 left promiscuous mode
2018-03-07T19:43:12+01:00 info kernel[]: [  362.937249] br-lan: port 1(eth0) entered disabled state
2018-03-07T19:43:12+01:00 info kernel[]: [  362.944671] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
2018-03-07T19:43:12+01:00 info kernel[]: [  362.946426] device eth2 left promiscuous mode
2018-03-07T19:43:12+01:00 info kernel[]: [  362.946470] br-lan: port 2(eth2) entered disabled state
2018-03-07T19:43:12+01:00 info kernel[]: [  362.953729] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
2018-03-07T18:43:12+01:00 notice netifd[]: Interface 'lan' is disabled
2018-03-07T18:43:12+01:00 notice netifd[]: Network device 'eth2' link is down
2018-03-07T18:43:12+01:00 notice netifd[]: Network device 'eth0' link is down
2018-03-07T18:43:12+01:00 notice netifd[]: Bridge 'br-lan' link is down
2018-03-07T18:43:12+01:00 notice netifd[]: Interface 'lan' has link connectivity loss
2018-03-07T18:43:12+01:00 notice netifd[]: Interface 'loopback' is now down
2018-03-07T18:43:12+01:00 notice netifd[]: Interface 'loopback' is disabled
2018-03-07T18:43:12+01:00 notice netifd[]: Network device 'lo' link is down
2018-03-07T18:43:12+01:00 notice netifd[]: Interface 'loopback' has link connectivity loss
2018-03-07T18:43:12+01:00 notice netifd[]: Interface 'wan' is disabled
2018-03-07T18:43:14+01:00 emerg procd[]: 'radio0' is disabled
2018-03-07T18:43:14+01:00 emerg procd[]: 'radio1' is disabled
2018-03-07T18:43:14+01:00 emerg procd[]: 'radio0' is disabled
2018-03-07T18:43:14+01:00 emerg procd[]: 'radio1' is disabled
2018-03-07T19:43:14+01:00 info kernel[]: [  364.569570] device eth0 entered promiscuous mode
2018-03-07T18:43:14+01:00 notice netifd[]: Interface 'lan' is enabled
2018-03-07T19:43:14+01:00 info kernel[]: [  364.571021] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
2018-03-07T18:43:14+01:00 notice netifd[]: Interface 'lan' is setting up now
2018-03-07T18:43:14+01:00 notice netifd[]: Interface 'lan' is now up
2018-03-07T19:43:14+01:00 info kernel[]: [  364.579796] device eth2 entered promiscuous mode
2018-03-07T18:43:14+01:00 notice netifd[]: Interface 'loopback' is enabled
2018-03-07T18:43:14+01:00 notice netifd[]: Interface 'loopback' is setting up now
2018-03-07T18:43:14+01:00 notice netifd[]: Interface 'loopback' is now up
2018-03-07T18:43:14+01:00 notice netifd[]: Interface 'wan' is enabled
2018-03-07T19:43:14+01:00 info kernel[]: [  364.587149] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
2018-03-07T18:43:14+01:00 notice netifd[]: Network device 'lo' link is up
2018-03-07T18:43:14+01:00 notice netifd[]: Interface 'loopback' has link connectivity 
2018-03-07T19:43:14+01:00 info dnsmasq[2626]: exiting on receipt of SIGTERM
2018-03-07T19:43:14+01:00 info dnsmasq[4265]: started, version 2.73 DNS disabled
2018-03-07T19:43:14+01:00 info dnsmasq[4265]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
2018-03-07T19:43:14+01:00 info dnsmasq[4265]: DNS service limited to local subnets
2018-03-07T19:43:14+01:00 info dnsmasq-dhcp[4265]: DHCP, IP range 192.168.100.50 -- 192.168.100.199, lease time 12h
2018-03-07T19:43:14+01:00 info dnsmasq-dhcp[4265]: read /etc/ethers - 0 addresses
2018-03-07T18:43:14+01:00 notice firewall[]: Reloading firewall due to ifup of lan (br-lan)
2018-03-07T18:43:16+01:00 notice netifd[]: Network device 'eth0' link is up
2018-03-07T18:43:16+01:00 notice netifd[]: Bridge 'br-lan' link is up
2018-03-07T18:43:16+01:00 notice netifd[]: Interface 'lan' has link connectivity 
2018-03-07T19:43:16+01:00 info kernel[]: [  366.560707] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
2018-03-07T19:43:16+01:00 info kernel[]: [  366.560733] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:43:16+01:00 info kernel[]: [  366.560753] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:43:16+01:00 info kernel[]: [  366.560796] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
2018-03-07T19:43:16+01:00 info kernel[]: [  366.570747] mvneta f1070000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
2018-03-07T19:43:16+01:00 info kernel[]: [  366.570765] br-lan: port 2(eth2) entered forwarding state
2018-03-07T19:43:16+01:00 info kernel[]: [  366.570781] br-lan: port 2(eth2) entered forwarding state
2018-03-07T18:43:16+01:00 notice netifd[]: Network device 'eth2' link is up
2018-03-07T19:43:18+01:00 info kernel[]: [  368.560693] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:43:18+01:00 info kernel[]: [  368.570731] br-lan: port 2(eth2) entered forwarding state
2018-03-07T19:43:51+01:00 info dnsmasq-dhcp[4265]: DHCPREQUEST(br-lan) 192.168.1.242 b8:ac:6f:59:f1:76 
2018-03-07T19:43:51+01:00 info dnsmasq-dhcp[4265]: DHCPNAK(br-lan) 192.168.1.242 b8:ac:6f:59:f1:76 wrong network
2018-03-07T18:43:51+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T19:43:52+01:00 warning odhcpd[]: Last message 'DHCPV6 SOLICIT IA_NA' repeated 1 times, supressed by syslog-ng on turris
2018-03-07T18:43:52+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T18:43:52+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T18:43:53+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T19:43:54+01:00 info dnsmasq-dhcp[4265]: DHCPDISCOVER(br-lan) b8:ac:6f:59:f1:76 
2018-03-07T19:43:54+01:00 info dnsmasq-dhcp[4265]: DHCPOFFER(br-lan) 192.168.100.192 b8:ac:6f:59:f1:76 
2018-03-07T19:43:54+01:00 info dnsmasq-dhcp[4265]: read /etc/ethers - 0 addresses
2018-03-07T19:43:54+01:00 info dnsmasq-dhcp[]: Last message 'read /etc/ethers - 0' repeated 2 times, supressed by syslog-ng on turris
2018-03-07T19:43:54+01:00 info dnsmasq-dhcp[4265]: DHCPREQUEST(br-lan) 192.168.100.192 b8:ac:6f:59:f1:76 
2018-03-07T19:43:54+01:00 info dnsmasq-dhcp[4265]: DHCPACK(br-lan) 192.168.100.192 b8:ac:6f:59:f1:76 D4CHSTOCK
2018-03-07T18:44:01+01:00 info cron[4554]: (root) CMD (nethist_stats.lua)
2018-03-07T18:44:01+01:00 info cron[4555]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:44:52+01:00 notice netifd[]: Interface 'lan' is now down
2018-03-07T19:44:52+01:00 info kernel[]: [  462.603453] br-lan: port 2(eth2) entered disabled state
2018-03-07T19:44:52+01:00 info kernel[]: [  462.603477] br-lan: port 1(eth0) entered disabled state
2018-03-07T19:44:52+01:00 info kernel[]: [  462.607875] device eth0 left promiscuous mode
2018-03-07T19:44:52+01:00 info kernel[]: [  462.607910] br-lan: port 1(eth0) entered disabled state
2018-03-07T19:44:52+01:00 info kernel[]: [  462.615308] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
2018-03-07T19:44:52+01:00 info kernel[]: [  462.616852] device eth2 left promiscuous mode
2018-03-07T19:44:52+01:00 info kernel[]: [  462.616891] br-lan: port 2(eth2) entered disabled state
2018-03-07T19:44:52+01:00 info kernel[]: [  462.624511] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
2018-03-07T18:44:52+01:00 notice netifd[]: Interface 'lan' is disabled
2018-03-07T18:44:52+01:00 notice netifd[]: Network device 'eth2' link is down
2018-03-07T18:44:52+01:00 notice netifd[]: Network device 'eth0' link is down
2018-03-07T18:44:52+01:00 notice netifd[]: Bridge 'br-lan' link is down
2018-03-07T18:44:52+01:00 notice netifd[]: Interface 'lan' has link connectivity loss
2018-03-07T18:44:52+01:00 notice netifd[]: Interface 'loopback' is now down
2018-03-07T18:44:52+01:00 notice netifd[]: Interface 'loopback' is disabled
2018-03-07T18:44:52+01:00 notice netifd[]: Network device 'lo' link is down
2018-03-07T18:44:52+01:00 notice netifd[]: Interface 'loopback' has link connectivity loss
2018-03-07T18:44:52+01:00 notice netifd[]: Interface 'wan' is disabled
2018-03-07T18:44:53+01:00 emerg procd[]: 'radio0' is disabled
2018-03-07T18:44:53+01:00 emerg procd[]: 'radio1' is disabled
2018-03-07T18:44:53+01:00 emerg procd[]: 'radio0' is disabled
2018-03-07T18:44:53+01:00 emerg procd[]: 'radio1' is disabled
2018-03-07T18:44:54+01:00 notice netifd[]: Interface 'lan' is enabled
2018-03-07T19:44:54+01:00 info kernel[]: [  464.298130] device eth0 entered promiscuous mode
2018-03-07T19:44:54+01:00 info kernel[]: [  464.299400] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
2018-03-07T18:44:54+01:00 notice netifd[]: Interface 'lan' is setting up now
2018-03-07T18:44:54+01:00 notice netifd[]: Interface 'lan' is now up
2018-03-07T19:44:54+01:00 info kernel[]: [  464.310016] device eth2 entered promiscuous mode
2018-03-07T18:44:54+01:00 notice netifd[]: Interface 'loopback' is enabled
2018-03-07T18:44:54+01:00 notice netifd[]: Interface 'loopback' is setting up now
2018-03-07T18:44:54+01:00 notice netifd[]: Interface 'loopback' is now up
2018-03-07T18:44:54+01:00 notice netifd[]: Interface 'wan' is enabled
2018-03-07T19:44:54+01:00 info kernel[]: [  464.316760] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
2018-03-07T18:44:54+01:00 notice netifd[]: Network device 'lo' link is up
2018-03-07T18:44:54+01:00 notice netifd[]: Interface 'loopback' has link connectivity 
2018-03-07T19:44:54+01:00 info dnsmasq[4265]: exiting on receipt of SIGTERM
2018-03-07T18:44:54+01:00 notice firewall[]: Reloading firewall due to ifup of lan (br-lan)
2018-03-07T19:44:54+01:00 info dnsmasq[4863]: started, version 2.73 DNS disabled
2018-03-07T19:44:54+01:00 info dnsmasq[4863]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
2018-03-07T19:44:54+01:00 info dnsmasq[4863]: DNS service limited to local subnets
2018-03-07T19:44:54+01:00 info dnsmasq-dhcp[4863]: DHCP, IP range 192.168.100.50 -- 192.168.100.199, lease time 12h
2018-03-07T19:44:54+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T18:44:56+01:00 notice netifd[]: Network device 'eth0' link is up
2018-03-07T18:44:56+01:00 notice netifd[]: Bridge 'br-lan' link is up
2018-03-07T18:44:56+01:00 notice netifd[]: Interface 'lan' has link connectivity 
2018-03-07T19:44:56+01:00 info kernel[]: [  466.290706] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
2018-03-07T19:44:56+01:00 info kernel[]: [  466.290731] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:44:56+01:00 info kernel[]: [  466.290749] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:44:56+01:00 info kernel[]: [  466.290788] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
2018-03-07T19:44:56+01:00 info kernel[]: [  466.300730] mvneta f1070000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
2018-03-07T19:44:56+01:00 info kernel[]: [  466.300751] br-lan: port 2(eth2) entered forwarding state
2018-03-07T19:44:56+01:00 info kernel[]: [  466.300769] br-lan: port 2(eth2) entered forwarding state
2018-03-07T18:44:56+01:00 notice netifd[]: Network device 'eth2' link is up
2018-03-07T19:44:58+01:00 info kernel[]: [  468.290693] br-lan: port 1(eth0) entered forwarding state
2018-03-07T19:44:58+01:00 info kernel[]: [  468.300698] br-lan: port 2(eth2) entered forwarding state
2018-03-07T18:45:01+01:00 info cron[4938]: (root) CMD (   /usr/bin/notifier)
2018-03-07T18:45:01+01:00 info cron[4939]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T18:45:01+01:00 info cron[4940]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:45:07+01:00 warning watchdog[]: Restarted resolver
2018-03-07T18:45:07+01:00 warning watchdog[]: Restarted nethist
2018-03-07T19:45:08+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.192 b8:ac:6f:59:f1:76 
2018-03-07T19:45:08+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.192 b8:ac:6f:59:f1:76 D4CHSTOCK
2018-03-07T18:45:39+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T18:45:39+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T19:45:39+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T18:46:01+01:00 info cron[5363]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:46:01+01:00 info cron[5362]: (root) CMD (nethist_stats.lua)
2018-03-07T19:46:24+01:00 info kernel[]: [  554.424099] cfg80211: Regulatory domain changed to country: CZ
2018-03-07T19:46:24+01:00 info kernel[]: [  554.424110] cfg80211:  DFS Master region: ETSI
2018-03-07T19:46:24+01:00 info kernel[]: [  554.424113] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
2018-03-07T19:46:24+01:00 info kernel[]: [  554.424119] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
2018-03-07T19:46:24+01:00 info kernel[]: [  554.424124] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2300 mBm), (N/A)
2018-03-07T19:46:24+01:00 info kernel[]: [  554.424129] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
2018-03-07T19:46:24+01:00 info kernel[]: [  554.424133] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
2018-03-07T19:46:24+01:00 info kernel[]: [  554.424137] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
2018-03-07T18:46:25+01:00 notice netifd[]: radio0 (5422): command failed: Not supported (-95)
2018-03-07T18:46:25+01:00 notice netifd[]: radio0 (5422): Configuration file: /var/run/hostapd-phy0.conf
2018-03-07T18:46:25+01:00 notice netifd[]: radio1 (5423): Configuration file: /var/run/hostapd-phy1.conf
2018-03-07T19:46:26+01:00 info kernel[]: [  556.816574] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
2018-03-07T19:46:26+01:00 info kernel[]: [  556.834142] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
2018-03-07T18:46:26+01:00 notice netifd[]: radio1 (5423): wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
2018-03-07T19:46:26+01:00 info kernel[]: [  556.835295] device wlan1 entered promiscuous mode
2018-03-07T19:46:26+01:00 info kernel[]: [  556.835500] device wlan0 entered promiscuous mode
2018-03-07T18:46:26+01:00 notice netifd[]: radio0 (5422): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
2018-03-07T18:46:26+01:00 notice netifd[]: radio1 (5423): Using interface wlan1 with hwaddr 04:f0:21:23:19:f6 and ssid "FLEFLEF"
2018-03-07T18:46:26+01:00 notice netifd[]: radio0 (5422): wlan0: interface state COUNTRY_UPDATE->HT_SCAN
2018-03-07T19:46:26+01:00 info kernel[]: [  556.900414] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
2018-03-07T19:46:26+01:00 info kernel[]: [  556.900486] br-lan: port 3(wlan1) entered forwarding state
2018-03-07T19:46:26+01:00 info kernel[]: [  556.900506] br-lan: port 3(wlan1) entered forwarding state
2018-03-07T18:46:26+01:00 notice netifd[]: radio1 (5423): wlan1: interface state COUNTRY_UPDATE->ENABLED
2018-03-07T18:46:26+01:00 notice netifd[]: radio1 (5423): wlan1: AP-ENABLED 
2018-03-07T18:46:27+01:00 notice netifd[]: radio0 (5422): Using interface wlan0 with hwaddr 04:f0:21:24:20:30 and ssid "FLEFLEF"
2018-03-07T18:46:27+01:00 notice netifd[]: radio0 (5422): wlan0: interface state HT_SCAN->ENABLED
2018-03-07T18:46:27+01:00 notice netifd[]: radio0 (5422): wlan0: AP-ENABLED 
2018-03-07T19:46:27+01:00 info kernel[]: [  557.192571] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
2018-03-07T19:46:27+01:00 info kernel[]: [  557.192641] br-lan: port 4(wlan0) entered forwarding state
2018-03-07T19:46:27+01:00 info kernel[]: [  557.192667] br-lan: port 4(wlan0) entered forwarding state
2018-03-07T19:46:28+01:00 info kernel[]: [  558.890698] br-lan: port 3(wlan1) entered forwarding state
2018-03-07T19:46:29+01:00 info kernel[]: [  559.190690] br-lan: port 4(wlan0) entered forwarding state
2018-03-07T19:46:36+01:00 info kernel[]: [  566.969718] br-lan: port 3(wlan1) entered disabled state
2018-03-07T19:46:36+01:00 info kernel[]: [  566.972559] device wlan1 left promiscuous mode
2018-03-07T19:46:36+01:00 info kernel[]: [  566.972614] br-lan: port 3(wlan1) entered disabled state
2018-03-07T18:46:37+01:00 notice netifd[]: radio1 (5602): Configuration file: /var/run/hostapd-phy1.conf
2018-03-07T18:46:37+01:00 notice netifd[]: radio1 (5602): wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
2018-03-07T19:46:37+01:00 info kernel[]: [  567.167284] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
2018-03-07T19:46:37+01:00 info kernel[]: [  567.168303] device wlan1 entered promiscuous mode
2018-03-07T19:46:37+01:00 info kernel[]: [  567.168341] br-lan: port 3(wlan1) entered forwarding state
2018-03-07T19:46:37+01:00 info kernel[]: [  567.168359] br-lan: port 3(wlan1) entered forwarding state
2018-03-07T18:46:37+01:00 notice netifd[]: radio1 (5602): Using interface wlan1 with hwaddr 04:f0:21:23:19:f6 and ssid "FLEFLEF"
2018-03-07T18:46:37+01:00 notice netifd[]: radio1 (5602): wlan1: interface state COUNTRY_UPDATE->ENABLED
2018-03-07T18:46:37+01:00 notice netifd[]: radio1 (5602): wlan1: AP-ENABLED 
2018-03-07T19:46:37+01:00 info kernel[]: [  567.233740] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
2018-03-07T18:46:37+01:00 notice netifd[]: Network device 'wlan1' link is up
2018-03-07T19:46:37+01:00 info kernel[]: [  567.332265] br-lan: port 4(wlan0) entered disabled state
2018-03-07T19:46:37+01:00 info kernel[]: [  567.335048] device wlan0 left promiscuous mode
2018-03-07T19:46:37+01:00 info kernel[]: [  567.335078] br-lan: port 4(wlan0) entered disabled state
2018-03-07T18:46:37+01:00 notice netifd[]: radio0 (5672): command failed: Not supported (-95)
2018-03-07T18:46:37+01:00 notice netifd[]: radio0 (5672): Configuration file: /var/run/hostapd-phy0.conf
2018-03-07T19:46:38+01:00 info kernel[]: [  568.806547] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
2018-03-07T18:46:38+01:00 notice netifd[]: radio0 (5672): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
2018-03-07T19:46:38+01:00 info kernel[]: [  568.807871] device wlan0 entered promiscuous mode
2018-03-07T18:46:38+01:00 notice netifd[]: radio0 (5672): wlan0: interface state COUNTRY_UPDATE->HT_SCAN
2018-03-07T18:46:39+01:00 notice netifd[]: radio0 (5672): Using interface wlan0 with hwaddr 04:f0:21:24:20:30 and ssid "FLEFLEF"
2018-03-07T18:46:39+01:00 notice netifd[]: radio0 (5672): wlan0: interface state HT_SCAN->ENABLED
2018-03-07T18:46:39+01:00 notice netifd[]: radio0 (5672): wlan0: AP-ENABLED 
2018-03-07T19:46:39+01:00 info kernel[]: [  569.160699] br-lan: port 3(wlan1) entered forwarding state
2018-03-07T19:46:39+01:00 info kernel[]: [  569.163976] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
2018-03-07T19:46:39+01:00 info kernel[]: [  569.164043] br-lan: port 4(wlan0) entered forwarding state
2018-03-07T19:46:39+01:00 info kernel[]: [  569.164065] br-lan: port 4(wlan0) entered forwarding state
2018-03-07T18:46:39+01:00 notice netifd[]: Network device 'wlan0' link is up
2018-03-07T19:46:41+01:00 info kernel[]: [  571.160693] br-lan: port 4(wlan0) entered forwarding state
2018-03-07T18:47:01+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: authenticated
2018-03-07T18:47:01+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: associated (aid 1)
2018-03-07T18:47:01+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 RADIUS: starting accounting session D1AF84F222F318B3
2018-03-07T18:47:01+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 WPA: pairwise key handshake completed (RSN)
2018-03-07T19:47:01+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.1.168 f0:7b:cb:36:2b:38 
2018-03-07T19:47:01+01:00 info dnsmasq-dhcp[4863]: DHCPNAK(br-lan) 192.168.1.168 f0:7b:cb:36:2b:38 wrong network
2018-03-07T18:47:01+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::5ce/128 
2018-03-07T18:47:01+01:00 info cron[5819]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:47:02+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::5ce/128 
2018-03-07T18:47:02+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::5ce/128 
2018-03-07T18:47:03+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::5ce/128 
2018-03-07T19:47:04+01:00 info dnsmasq-dhcp[4863]: DHCPDISCOVER(br-lan) f0:7b:cb:36:2b:38 
2018-03-07T19:47:04+01:00 info dnsmasq-dhcp[4863]: DHCPOFFER(br-lan) 192.168.100.78 f0:7b:cb:36:2b:38 
2018-03-07T19:47:04+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T19:47:04+01:00 info dnsmasq-dhcp[]: Last message 'read /etc/ethers - 0' repeated 2 times, supressed by syslog-ng on turris
2018-03-07T19:47:04+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.78 f0:7b:cb:36:2b:38 
2018-03-07T19:47:04+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.78 f0:7b:cb:36:2b:38 D4CHSTOCK
2018-03-07T18:47:23+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 IEEE 802.11: authenticated
2018-03-07T18:47:23+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 IEEE 802.11: associated (aid 2)
2018-03-07T18:47:23+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 RADIUS: starting accounting session FF2458AEB70CDF3C
2018-03-07T18:47:23+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 WPA: pairwise key handshake completed (RSN)
2018-03-07T19:47:23+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.1.195 9c:b6:d0:89:4b:d5 
2018-03-07T19:47:23+01:00 info dnsmasq-dhcp[4863]: DHCPNAK(br-lan) 192.168.1.195 9c:b6:d0:89:4b:d5 wrong network
2018-03-07T18:47:23+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 00010001222378479cb6d0894bd5 on br-lan: ok fdb8:3854:194d::340/128 
2018-03-07T19:47:25+01:00 warning odhcpd[]: Last message 'DHCPV6 SOLICIT IA_NA' repeated 1 times, supressed by syslog-ng on turris
2018-03-07T18:47:25+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 00010001222378479cb6d0894bd5 on br-lan: ok fdb8:3854:194d::340/128 
2018-03-07T19:47:26+01:00 info dnsmasq-dhcp[4863]: DHCPDISCOVER(br-lan) 9c:b6:d0:89:4b:d5 
2018-03-07T19:47:26+01:00 info dnsmasq-dhcp[4863]: DHCPOFFER(br-lan) 192.168.100.125 9c:b6:d0:89:4b:d5 
2018-03-07T19:47:26+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T19:47:26+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.125 9c:b6:d0:89:4b:d5 
2018-03-07T19:47:26+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.125 9c:b6:d0:89:4b:d5 ARABOOK
2018-03-07T18:48:01+01:00 info cron[5869]: (root) CMD (nethist_stats.lua)
2018-03-07T18:48:01+01:00 info cron[5870]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:48:25+01:00 warning []: Unable to use //tmp//yin2yang.xsl (No such file or directory).
2018-03-07T18:48:25+01:00 warning []: YANG format data models will not be available via get-schema.
2018-03-07T18:48:25+01:00 warning []: Unable to get tty (Not a tty) to get the client's hostname (session 5891).
2018-03-07T18:49:01+01:00 info cron[6291]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:49:53+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa IEEE 802.11: authenticated
2018-03-07T18:49:53+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa IEEE 802.11: associated (aid 3)
2018-03-07T18:49:53+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa RADIUS: starting accounting session 514A1CD181580944
2018-03-07T18:49:53+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa WPA: pairwise key handshake completed (RSN)
2018-03-07T19:49:54+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.1.220 dc:41:5f:89:09:aa 
2018-03-07T19:49:54+01:00 info dnsmasq-dhcp[4863]: DHCPNAK(br-lan) 192.168.1.220 dc:41:5f:89:09:aa wrong network
2018-03-07T18:49:54+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa IEEE 802.11: disassociated
2018-03-07T18:49:55+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
2018-03-07T18:49:57+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa IEEE 802.11: authenticated
2018-03-07T18:49:57+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa IEEE 802.11: associated (aid 3)
2018-03-07T18:49:57+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa RADIUS: starting accounting session 9AA6A83B655E13D8
2018-03-07T18:49:57+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa WPA: pairwise key handshake completed (RSN)
2018-03-07T19:49:57+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.1.220 dc:41:5f:89:09:aa 
2018-03-07T19:49:57+01:00 info dnsmasq-dhcp[4863]: DHCPNAK(br-lan) 192.168.1.220 dc:41:5f:89:09:aa wrong network
2018-03-07T19:49:58+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.1.220 dc:41:5f:89:09:aa 
2018-03-07T19:49:58+01:00 info dnsmasq-dhcp[4863]: DHCPNAK(br-lan) 192.168.1.220 dc:41:5f:89:09:aa wrong network
2018-03-07T18:50:01+01:00 info cron[6592]: (root) CMD (   /usr/bin/notifier)
2018-03-07T18:50:01+01:00 info cron[6594]: (root) CMD (nethist_stats.lua)
2018-03-07T18:50:01+01:00 info cron[6593]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T18:50:01+01:00 info cron[6595]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:50:03+01:00 info dnsmasq-dhcp[4863]: DHCPDISCOVER(br-lan) dc:41:5f:89:09:aa 
2018-03-07T19:50:03+01:00 info dnsmasq-dhcp[4863]: DHCPOFFER(br-lan) 192.168.100.170 dc:41:5f:89:09:aa 
2018-03-07T19:50:03+01:00 info dnsmasq-dhcp[4863]: DHCPDISCOVER(br-lan) dc:41:5f:89:09:aa 
2018-03-07T19:50:03+01:00 info dnsmasq-dhcp[4863]: DHCPOFFER(br-lan) 192.168.100.170 dc:41:5f:89:09:aa 
2018-03-07T19:50:04+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.170 dc:41:5f:89:09:aa 
2018-03-07T19:50:04+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.170 dc:41:5f:89:09:aa ARAPHONE
2018-03-07T18:50:08+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa IEEE 802.11: disassociated
2018-03-07T18:50:09+01:00 info hostapd[]: wlan0: STA dc:41:5f:89:09:aa IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
2018-03-07T18:50:16+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: authenticated
2018-03-07T18:50:16+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: associated (aid 1)
2018-03-07T18:50:16+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 RADIUS: starting accounting session 4DD037A26FEDD47C
2018-03-07T18:50:16+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 WPA: pairwise key handshake completed (RSN)
2018-03-07T19:50:17+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.1.64 b8:e8:56:3d:3f:c6 
2018-03-07T19:50:17+01:00 info dnsmasq-dhcp[4863]: DHCPNAK(br-lan) 192.168.1.64 b8:e8:56:3d:3f:c6 wrong network
2018-03-07T19:50:21+01:00 info dnsmasq-dhcp[4863]: DHCPDISCOVER(br-lan) b8:e8:56:3d:3f:c6 
2018-03-07T19:50:21+01:00 info dnsmasq-dhcp[4863]: DHCPOFFER(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 
2018-03-07T19:50:21+01:00 info dnsmasq-dhcp[4863]: DHCPDISCOVER(br-lan) b8:e8:56:3d:3f:c6 
2018-03-07T19:50:21+01:00 info dnsmasq-dhcp[4863]: DHCPOFFER(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 
2018-03-07T19:50:22+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 
2018-03-07T19:50:22+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 WILDMAC
2018-03-07T18:51:01+01:00 info cron[6915]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:51:01+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 IEEE 802.11: disassociated
2018-03-07T18:52:01+01:00 info cron[6986]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:52:01+01:00 info cron[6985]: (root) CMD (nethist_stats.lua)
2018-03-07T18:52:04+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 IEEE 802.11: authenticated
2018-03-07T18:52:04+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 IEEE 802.11: associated (aid 2)
2018-03-07T18:52:04+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 RADIUS: starting accounting session FB4B726445D5CF5C
2018-03-07T18:52:04+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 WPA: pairwise key handshake completed (RSN)
2018-03-07T19:52:04+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.125 9c:b6:d0:89:4b:d5 
2018-03-07T19:52:04+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.125 9c:b6:d0:89:4b:d5 ARABOOK
2018-03-07T18:52:04+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 00010001222378479cb6d0894bd5 on br-lan: ok fdb8:3854:194d::340/128 
2018-03-07T19:52:04+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T18:52:04+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 00010001222378479cb6d0894bd5 on br-lan: ok fdb8:3854:194d::340/128 
2018-03-07T18:52:05+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 00010001222378479cb6d0894bd5 on br-lan: ok fdb8:3854:194d::340/128 
2018-03-07T19:52:05+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T18:52:18+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 IEEE 802.11: disassociated
2018-03-07T18:53:01+01:00 info cron[7095]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:54:01+01:00 info cron[7812]: (root) CMD (nethist_stats.lua)
2018-03-07T18:54:01+01:00 info cron[7813]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:55:01+01:00 info cron[8342]: (root) CMD (   /usr/bin/notifier)
2018-03-07T18:55:01+01:00 info cron[8343]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T18:55:01+01:00 info cron[8344]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:55:07+01:00 warning watchdog[]: Restarted resolver
2018-03-07T18:55:07+01:00 warning watchdog[]: Restarted nethist
2018-03-07T18:56:01+01:00 info cron[9026]: (root) CMD (nethist_stats.lua)
2018-03-07T18:56:01+01:00 info cron[9027]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:56:39+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 WPA: group key handshake completed (RSN)
2018-03-07T18:56:45+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: deauthenticated due to local deauth request
2018-03-07T18:57:01+01:00 info cron[10339]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:58:01+01:00 info cron[12377]: (root) CMD (nethist_stats.lua)
2018-03-07T18:58:01+01:00 info cron[12378]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T18:59:01+01:00 info cron[14446]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:00:01+01:00 info cron[16485]: (root) CMD (/usr/bin/get-api-crl)
2018-03-07T19:00:01+01:00 info cron[16488]: (root) CMD (   /usr/bin/notifier)
2018-03-07T19:00:01+01:00 info cron[16491]: (root) CMD (nethist_stats.lua)
2018-03-07T19:00:01+01:00 info cron[16492]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:00:01+01:00 info cron[16493]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T19:01:01+01:00 info cron[18620]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:01:46+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: authenticated
2018-03-07T19:01:46+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: associated (aid 1)
2018-03-07T19:01:46+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 RADIUS: starting accounting session 45F19CF3361DA262
2018-03-07T19:01:46+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 WPA: pairwise key handshake completed (RSN)
2018-03-07T20:01:48+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 
2018-03-07T20:01:48+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 WILDMAC
2018-03-07T19:02:01+01:00 info cron[20710]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:02:01+01:00 info cron[20711]: (root) CMD (nethist_stats.lua)
2018-03-07T19:03:01+01:00 info cron[22777]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:04:01+01:00 info cron[24860]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:04:01+01:00 info cron[24861]: (root) CMD (nethist_stats.lua)
2018-03-07T19:05:01+01:00 info cron[26902]: (root) CMD (   /usr/bin/notifier)
2018-03-07T19:05:01+01:00 info cron[26903]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T19:05:01+01:00 info cron[26904]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:05:08+01:00 warning watchdog[]: Restarted resolver
2018-03-07T19:05:08+01:00 warning watchdog[]: Restarted nethist
2018-03-07T19:06:01+01:00 info cron[28981]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:06:01+01:00 info cron[28983]: (root) CMD (nethist_stats.lua)
2018-03-07T19:06:39+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 WPA: group key handshake completed (RSN)
2018-03-07T19:06:45+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: deauthenticated due to local deauth request
2018-03-07T19:07:01+01:00 info cron[30486]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:07:57+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: authenticated
2018-03-07T19:07:57+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: associated (aid 1)
2018-03-07T19:07:57+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 RADIUS: starting accounting session 438A96B721D88E38
2018-03-07T19:07:57+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 WPA: pairwise key handshake completed (RSN)
2018-03-07T20:07:58+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 
2018-03-07T20:07:58+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 WILDMAC
2018-03-07T19:08:01+01:00 info cron[32460]: (root) CMD (nethist_stats.lua)
2018-03-07T19:08:01+01:00 info cron[32461]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:08:57+01:00 warning []: Unable to use //tmp//yin2yang.xsl (No such file or directory).
2018-03-07T19:08:57+01:00 warning []: YANG format data models will not be available via get-schema.
2018-03-07T19:08:57+01:00 warning []: Unable to get tty (Not a tty) to get the client's hostname (session 1962).
2018-03-07T19:09:01+01:00 info cron[2104]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:09:24+01:00 warning []: Missing message-id in rpc-reply.
2018-03-07T19:10:01+01:00 info cron[4237]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T19:10:01+01:00 info cron[4236]: (root) CMD (   /usr/bin/notifier)
2018-03-07T19:10:01+01:00 info cron[4238]: (root) CMD (nethist_stats.lua)
2018-03-07T19:10:01+01:00 info cron[4239]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:11:01+01:00 info cron[6340]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:11:52+01:00 notice netifd[]: Interface 'lan' is now down
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.389863] br-lan: port 4(wlan0) entered disabled state
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.389923] br-lan: port 3(wlan1) entered disabled state
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.389952] br-lan: port 2(eth2) entered disabled state
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.389966] br-lan: port 1(eth0) entered disabled state
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.395324] device eth0 left promiscuous mode
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.395375] br-lan: port 1(eth0) entered disabled state
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.403076] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.404833] device eth2 left promiscuous mode
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.404890] br-lan: port 2(eth2) entered disabled state
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.412880] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.414445] device wlan0 left promiscuous mode
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.414489] br-lan: port 4(wlan0) entered disabled state
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.414674] device wlan1 left promiscuous mode
2018-03-07T20:11:52+01:00 info kernel[]: [ 2082.414700] br-lan: port 3(wlan1) entered disabled state
2018-03-07T19:11:52+01:00 notice netifd[]: Interface 'lan' is disabled
2018-03-07T19:11:52+01:00 notice netifd[]: Network device 'eth2' link is down
2018-03-07T19:11:52+01:00 notice netifd[]: Network device 'eth0' link is down
2018-03-07T19:11:52+01:00 notice netifd[]: Bridge 'br-lan' link is down
2018-03-07T19:11:52+01:00 notice netifd[]: Interface 'lan' has link connectivity loss
2018-03-07T19:11:52+01:00 notice netifd[]: Interface 'loopback' is now down
2018-03-07T19:11:52+01:00 notice netifd[]: Interface 'loopback' is disabled
2018-03-07T19:11:52+01:00 notice netifd[]: Network device 'lo' link is down
2018-03-07T19:11:52+01:00 notice netifd[]: Interface 'loopback' has link connectivity loss
2018-03-07T19:11:52+01:00 notice netifd[]: Interface 'wan' is disabled
2018-03-07T20:11:54+01:00 info kernel[]: [ 2084.119423] device eth0 entered promiscuous mode
2018-03-07T20:11:54+01:00 info kernel[]: [ 2084.120663] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
2018-03-07T19:11:54+01:00 notice netifd[]: Interface 'lan' is enabled
2018-03-07T19:11:54+01:00 notice netifd[]: Interface 'lan' is setting up now
2018-03-07T19:11:54+01:00 notice netifd[]: Interface 'lan' is now up
2018-03-07T20:11:54+01:00 info kernel[]: [ 2084.130084] device eth2 entered promiscuous mode
2018-03-07T19:11:54+01:00 notice netifd[]: Interface 'loopback' is enabled
2018-03-07T19:11:54+01:00 notice netifd[]: Interface 'loopback' is setting up now
2018-03-07T19:11:54+01:00 notice netifd[]: Interface 'loopback' is now up
2018-03-07T19:11:54+01:00 notice netifd[]: Interface 'wan' is enabled
2018-03-07T20:11:54+01:00 info kernel[]: [ 2084.137709] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
2018-03-07T19:11:54+01:00 notice netifd[]: Network device 'lo' link is up
2018-03-07T19:11:54+01:00 notice netifd[]: Interface 'loopback' has link connectivity 
2018-03-07T19:11:54+01:00 notice firewall[]: Reloading firewall due to ifup of lan (br-lan)
2018-03-07T19:11:54+01:00 notice netifd[]: radio0 (8418): command failed: Not supported (-95)
2018-03-07T19:11:54+01:00 notice netifd[]: radio0 (8418): Configuration file: /var/run/hostapd-phy0.conf
2018-03-07T19:11:55+01:00 notice netifd[]: radio0 (8418): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
2018-03-07T20:11:55+01:00 info kernel[]: [ 2085.816634] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
2018-03-07T20:11:55+01:00 info kernel[]: [ 2085.819639] device wlan0 entered promiscuous mode
2018-03-07T19:11:55+01:00 notice netifd[]: radio0 (8418): wlan0: interface state COUNTRY_UPDATE->HT_SCAN
2018-03-07T19:11:55+01:00 notice netifd[]: radio1 (8419): Configuration file: /var/run/hostapd-phy1.conf
2018-03-07T19:11:55+01:00 notice netifd[]: Bridge 'br-lan' link is up
2018-03-07T19:11:55+01:00 notice netifd[]: Interface 'lan' has link connectivity 
2018-03-07T19:11:55+01:00 notice netifd[]: radio1 (8419): wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
2018-03-07T20:11:55+01:00 info kernel[]: [ 2085.845798] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
2018-03-07T20:11:55+01:00 info kernel[]: [ 2085.846915] device wlan1 entered promiscuous mode
2018-03-07T20:11:55+01:00 info kernel[]: [ 2085.846951] br-lan: port 4(wlan1) entered forwarding state
2018-03-07T20:11:55+01:00 info kernel[]: [ 2085.846971] br-lan: port 4(wlan1) entered forwarding state
2018-03-07T20:11:55+01:00 info kernel[]: [ 2085.846997] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
2018-03-07T19:11:55+01:00 notice netifd[]: radio1 (8419): Using interface wlan1 with hwaddr 04:f0:21:23:19:f6 and ssid "FLEFLEF"
2018-03-07T19:11:55+01:00 notice netifd[]: radio1 (8419): wlan1: interface state COUNTRY_UPDATE->ENABLED
2018-03-07T19:11:55+01:00 notice netifd[]: radio1 (8419): wlan1: AP-ENABLED 
2018-03-07T20:11:55+01:00 info kernel[]: [ 2085.912808] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
2018-03-07T19:11:55+01:00 notice netifd[]: Network device 'wlan1' link is up
2018-03-07T19:11:56+01:00 notice netifd[]: Network device 'eth0' link is up
2018-03-07T20:11:56+01:00 info kernel[]: [ 2086.110720] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
2018-03-07T20:11:56+01:00 info kernel[]: [ 2086.110749] br-lan: port 1(eth0) entered forwarding state
2018-03-07T20:11:56+01:00 info kernel[]: [ 2086.110777] br-lan: port 1(eth0) entered forwarding state
2018-03-07T20:11:56+01:00 info kernel[]: [ 2086.120759] mvneta f1070000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
2018-03-07T20:11:56+01:00 info kernel[]: [ 2086.120781] br-lan: port 2(eth2) entered forwarding state
2018-03-07T20:11:56+01:00 info kernel[]: [ 2086.120810] br-lan: port 2(eth2) entered forwarding state
2018-03-07T19:11:56+01:00 notice netifd[]: Network device 'eth2' link is up
2018-03-07T19:11:56+01:00 notice netifd[]: radio0 (8418): Using interface wlan0 with hwaddr 04:f0:21:24:20:30 and ssid "FLEFLEF"
2018-03-07T19:11:56+01:00 notice netifd[]: radio0 (8418): wlan0: interface state HT_SCAN->ENABLED
2018-03-07T19:11:56+01:00 notice netifd[]: radio0 (8418): wlan0: AP-ENABLED 
2018-03-07T20:11:56+01:00 info kernel[]: [ 2086.176388] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
2018-03-07T20:11:56+01:00 info kernel[]: [ 2086.176453] br-lan: port 3(wlan0) entered forwarding state
2018-03-07T20:11:56+01:00 info kernel[]: [ 2086.176476] br-lan: port 3(wlan0) entered forwarding state
2018-03-07T19:11:56+01:00 notice netifd[]: Network device 'wlan0' link is up
2018-03-07T19:11:57+01:00 notice hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: did not acknowledge authentication response
2018-03-07T20:11:57+01:00 info kernel[]: [ 2087.840697] br-lan: port 4(wlan1) entered forwarding state
2018-03-07T20:11:58+01:00 info kernel[]: [ 2088.110697] br-lan: port 1(eth0) entered forwarding state
2018-03-07T20:11:58+01:00 info kernel[]: [ 2088.120694] br-lan: port 2(eth2) entered forwarding state
2018-03-07T20:11:58+01:00 info kernel[]: [ 2088.170697] br-lan: port 3(wlan0) entered forwarding state
2018-03-07T19:11:58+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: authenticated
2018-03-07T19:11:58+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: associated (aid 1)
2018-03-07T19:11:58+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 RADIUS: starting accounting session AC534AAE04DA9A53
2018-03-07T19:11:58+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 WPA: pairwise key handshake completed (RSN)
2018-03-07T20:11:58+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.78 f0:7b:cb:36:2b:38 
2018-03-07T20:11:58+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.78 f0:7b:cb:36:2b:38 D4CHSTOCK
2018-03-07T19:11:59+01:00 warning odhcpd[1991]: DHCPV6 CONFIRM IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: not on-link 
2018-03-07T19:11:59+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T19:12:00+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T20:12:00+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T19:12:01+01:00 info cron[8980]: (root) CMD (/usr/sbin/logrotate -s /tmp/logrotate.state /etc/logrotate.conf)
2018-03-07T19:12:01+01:00 info cron[8981]: (root) CMD (nethist_stats.lua)
2018-03-07T19:12:01+01:00 info cron[8984]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:12:49+01:00 notice netifd[]: Interface 'wan' is disabled
2018-03-07T19:12:49+01:00 notice netifd[]: Interface 'wan' is enabled
2018-03-07T19:12:49+01:00 notice netifd[]: Interface 'wan' has link connectivity 
2018-03-07T19:12:49+01:00 notice netifd[]: Interface 'wan' is setting up now
2018-03-07T19:12:49+01:00 notice netifd[]: wan (9918): udhcpc (v1.23.2) started
2018-03-07T19:12:49+01:00 notice netifd[]: wan (9918): Sending discover...
2018-03-07T20:12:55+01:00 notice netifd[]: Last message 'wan (9918): Sending ' repeated 1 times, supressed by syslog-ng on turris
2018-03-07T19:12:55+01:00 notice netifd[]: wan (9918): Sending discover...
2018-03-07T19:13:01+01:00 info cron[10132]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:13:10+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: authenticated
2018-03-07T19:13:10+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: associated (aid 1)
2018-03-07T19:13:10+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 RADIUS: starting accounting session 2E61143F18D02C60
2018-03-07T19:13:10+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 WPA: pairwise key handshake completed (RSN)
2018-03-07T20:13:12+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 
2018-03-07T20:13:12+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 WILDMAC
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.459174] device eth2 left promiscuous mode
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.459230] br-lan: port 2(eth2) entered disabled state
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.520834] device wlan1 left promiscuous mode
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.520876] br-lan: port 4(wlan1) entered disabled state
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.529825] device wlan0 left promiscuous mode
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.529882] br-lan: port 3(wlan0) entered disabled state
2018-03-07T19:13:47+01:00 notice netifd[]: Network device 'wlan1' link is down
2018-03-07T19:13:47+01:00 notice netifd[]: Network device 'wlan0' link is down
2018-03-07T19:13:47+01:00 notice netifd[]: wan (9918): Received SIGTERM
2018-03-07T19:13:47+01:00 notice netifd[]: Interface 'wan' is now down
2018-03-07T19:13:47+01:00 notice netifd[]: Interface 'wan' is disabled
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.638910] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
2018-03-07T19:13:47+01:00 notice netifd[]: Interface 'wan' is enabled
2018-03-07T19:13:47+01:00 notice netifd[]: Interface 'wan' is setting up now
2018-03-07T19:13:47+01:00 notice netifd[]: Network device 'eth2' link is down
2018-03-07T19:13:47+01:00 notice netifd[]: Interface 'wan' has link connectivity loss
2018-03-07T19:13:47+01:00 notice netifd[]: radio0 (10757): command failed: Not supported (-95)
2018-03-07T19:13:47+01:00 notice netifd[]: radio1 (10683): Configuration file: /var/run/hostapd-phy1.conf
2018-03-07T19:13:47+01:00 notice netifd[]: radio1 (10683): wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.975966] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.977036] device wlan1 entered promiscuous mode
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.977069] br-lan: port 2(wlan1) entered forwarding state
2018-03-07T20:13:47+01:00 info kernel[]: [ 2197.977082] br-lan: port 2(wlan1) entered forwarding state
2018-03-07T19:13:47+01:00 notice netifd[]: radio1 (10683): Using interface wlan1 with hwaddr 04:f0:21:23:19:f6 and ssid "FLEFLEF"
2018-03-07T19:13:48+01:00 notice netifd[]: radio0 (10757): Configuration file: /var/run/hostapd-phy0.conf
2018-03-07T20:13:49+01:00 info kernel[]: [ 2199.320065] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
2018-03-07T20:13:49+01:00 info kernel[]: [ 2199.320233] br-lan: port 2(wlan1) entered disabled state
2018-03-07T20:13:49+01:00 info kernel[]: [ 2199.339933] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
2018-03-07T20:13:49+01:00 info kernel[]: [ 2199.340014] br-lan: port 2(wlan1) entered forwarding state
2018-03-07T20:13:49+01:00 info kernel[]: [ 2199.340034] br-lan: port 2(wlan1) entered forwarding state
2018-03-07T19:13:49+01:00 notice netifd[]: radio1 (10683): wlan1: interface state COUNTRY_UPDATE->ENABLED
2018-03-07T19:13:49+01:00 notice netifd[]: radio1 (10683): wlan1: AP-ENABLED 
2018-03-07T19:13:49+01:00 notice netifd[]: radio0 (10757): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
2018-03-07T20:13:49+01:00 info kernel[]: [ 2199.341778] device wlan0 entered promiscuous mode
2018-03-07T19:13:49+01:00 notice netifd[]: radio0 (10757): wlan0: interface state COUNTRY_UPDATE->HT_SCAN
2018-03-07T19:13:49+01:00 notice netifd[]: Network device 'wlan1' link is up
2018-03-07T19:13:49+01:00 notice netifd[]: Network device 'eth2' link is up
2018-03-07T19:13:49+01:00 notice netifd[]: Interface 'wan' has link connectivity 
2018-03-07T19:13:49+01:00 notice netifd[]: Interface 'wan' is setting up now
2018-03-07T20:13:49+01:00 info kernel[]: [ 2199.640711] mvneta f1070000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
2018-03-07T19:13:49+01:00 notice netifd[]: radio0 (10757): Using interface wlan0 with hwaddr 04:f0:21:24:20:30 and ssid "FLEFLEF"
2018-03-07T19:13:49+01:00 notice netifd[]: wan (10891): udhcpc (v1.23.2) started
2018-03-07T19:13:49+01:00 notice netifd[]: wan (10891): Sending discover...
2018-03-07T19:13:49+01:00 notice netifd[]: radio0 (10757): wlan0: interface state HT_SCAN->ENABLED
2018-03-07T19:13:49+01:00 notice netifd[]: radio0 (10757): wlan0: AP-ENABLED 
2018-03-07T20:13:49+01:00 info kernel[]: [ 2199.703239] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
2018-03-07T20:13:49+01:00 info kernel[]: [ 2199.703344] br-lan: port 3(wlan0) entered forwarding state
2018-03-07T20:13:49+01:00 info kernel[]: [ 2199.703385] br-lan: port 3(wlan0) entered forwarding state
2018-03-07T19:13:49+01:00 notice netifd[]: Network device 'wlan0' link is up
2018-03-07T20:13:51+01:00 info kernel[]: [ 2201.330696] br-lan: port 2(wlan1) entered forwarding state
2018-03-07T20:13:51+01:00 info kernel[]: [ 2201.700693] br-lan: port 3(wlan0) entered forwarding state
2018-03-07T19:13:52+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: authenticated
2018-03-07T19:13:52+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: associated (aid 1)
2018-03-07T19:13:52+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 RADIUS: starting accounting session 9AB1EFF7586008EF
2018-03-07T19:13:52+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 WPA: pairwise key handshake completed (RSN)
2018-03-07T20:13:52+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.78 f0:7b:cb:36:2b:38 
2018-03-07T20:13:52+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.78 f0:7b:cb:36:2b:38 D4CHSTOCK
2018-03-07T19:13:52+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T20:13:52+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T19:13:52+01:00 notice netifd[]: wan (10891): Sending discover...
2018-03-07T19:13:53+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T20:13:53+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T19:13:53+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: authenticated
2018-03-07T19:13:53+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: associated (aid 1)
2018-03-07T19:13:53+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 RADIUS: starting accounting session 0A15703879DBFA1F
2018-03-07T19:13:53+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 WPA: pairwise key handshake completed (RSN)
2018-03-07T19:13:55+01:00 notice netifd[]: wan (10891): Sending discover...
2018-03-07T19:14:01+01:00 info cron[11054]: (root) CMD (nethist_stats.lua)
2018-03-07T19:14:01+01:00 info cron[11055]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:14:14+01:00 warning []: Unable to use //tmp//yin2yang.xsl (No such file or directory).
2018-03-07T19:14:14+01:00 warning []: YANG format data models will not be available via get-schema.
2018-03-07T19:14:14+01:00 warning []: Unable to get tty (Not a tty) to get the client's hostname (session 11132).
2018-03-07T19:15:01+01:00 info cron[11483]: (root) CMD (   /usr/bin/notifier)
2018-03-07T19:15:01+01:00 info cron[11485]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:15:01+01:00 info cron[11484]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T19:15:07+01:00 warning watchdog[]: Restarted resolver
2018-03-07T19:15:07+01:00 warning watchdog[]: Restarted nethist
2018-03-07T19:16:01+01:00 info cron[12096]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:16:01+01:00 info cron[12095]: (root) CMD (nethist_stats.lua)
2018-03-07T19:17:01+01:00 info cron[12561]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:17:20+01:00 notice netifd[]: wan (10891): Received SIGTERM
2018-03-07T19:17:20+01:00 notice netifd[]: Interface 'wan' is now down
2018-03-07T19:17:20+01:00 notice netifd[]: Interface 'wan' is disabled
2018-03-07T20:17:20+01:00 info kernel[]: [ 2410.898231] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
2018-03-07T19:17:20+01:00 notice netifd[]: Interface 'wan' has link connectivity loss
2018-03-07T19:17:20+01:00 notice netifd[]: Interface 'wan' is enabled
2018-03-07T20:17:20+01:00 info kernel[]: [ 2410.906316] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
2018-03-07T20:17:44+01:00 info kernel[]: [ 2434.523597] device eth2 entered promiscuous mode
2018-03-07T19:17:46+01:00 notice netifd[]: Network device 'eth2' link is up
2018-03-07T20:17:46+01:00 info kernel[]: [ 2436.520711] mvneta f1070000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
2018-03-07T20:17:46+01:00 info kernel[]: [ 2436.520737] br-lan: port 4(eth2) entered forwarding state
2018-03-07T20:17:46+01:00 info kernel[]: [ 2436.520773] br-lan: port 4(eth2) entered forwarding state
2018-03-07T20:17:48+01:00 info kernel[]: [ 2438.520697] br-lan: port 4(eth2) entered forwarding state
2018-03-07T19:18:01+01:00 info cron[13516]: (root) CMD (nethist_stats.lua)
2018-03-07T19:18:01+01:00 info cron[13517]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:19:01+01:00 info cron[13713]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:20:01+01:00 info cron[13815]: (root) CMD (   /usr/bin/notifier)
2018-03-07T19:20:01+01:00 info cron[13814]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T19:20:01+01:00 info cron[13816]: (root) CMD (nethist_stats.lua)
2018-03-07T19:20:01+01:00 info cron[13820]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:21:01+01:00 info cron[13942]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:22:01+01:00 info cron[13980]: (root) CMD (nethist_stats.lua)
2018-03-07T19:22:01+01:00 info cron[13981]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:23:01+01:00 info cron[14019]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:23:49+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 WPA: group key handshake completed (RSN)
2018-03-07T19:23:56+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: deauthenticated due to local deauth request
2018-03-07T19:24:01+01:00 info cron[14059]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:24:01+01:00 info cron[14058]: (root) CMD (nethist_stats.lua)
2018-03-07T19:25:01+01:00 info cron[14270]: (root) CMD (   /usr/bin/notifier)
2018-03-07T19:25:01+01:00 info cron[14271]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T19:25:01+01:00 info cron[14274]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:25:07+01:00 warning watchdog[]: Restarted resolver
2018-03-07T19:25:07+01:00 warning watchdog[]: Restarted nethist
2018-03-07T19:25:08+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: authenticated
2018-03-07T19:25:08+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: associated (aid 1)
2018-03-07T19:25:08+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 RADIUS: starting accounting session 78503AE7450AE653
2018-03-07T19:25:08+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 WPA: pairwise key handshake completed (RSN)
2018-03-07T20:25:09+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 
2018-03-07T20:25:09+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 WILDMAC
2018-03-07T19:25:49+01:00 notice netifd[]: Interface 'wan' is disabled
2018-03-07T19:25:49+01:00 notice netifd[]: Interface 'wan' is enabled
2018-03-07T20:25:49+01:00 info kernel[]: [ 2919.735323] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
2018-03-07T19:26:01+01:00 info cron[15494]: (root) CMD (nethist_stats.lua)
2018-03-07T19:26:01+01:00 info cron[15495]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:27:01+01:00 info cron[15959]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:28:01+01:00 info cron[16609]: (root) CMD (nethist_stats.lua)
2018-03-07T19:28:01+01:00 info cron[16610]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:29:01+01:00 info cron[17032]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:30:01+01:00 info cron[17456]: (root) CMD (/usr/bin/get-api-crl)
2018-03-07T19:30:01+01:00 info cron[17459]: (root) CMD (   /usr/bin/notifier)
2018-03-07T19:30:01+01:00 info cron[17460]: (root) CMD (nethist_stats.lua)
2018-03-07T19:30:01+01:00 info cron[17461]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:30:01+01:00 info cron[17462]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T19:30:13+01:00 warning []: Unable to use //tmp//yin2yang.xsl (No such file or directory).
2018-03-07T19:30:13+01:00 warning []: YANG format data models will not be available via get-schema.
2018-03-07T19:30:13+01:00 warning []: Unable to get tty (Not a tty) to get the client's hostname (session 17612).
2018-03-07T19:30:41+01:00 warning []: Missing message-id in rpc-reply.
2018-03-07T19:31:01+01:00 info cron[17983]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:31:45+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 IEEE 802.11: authenticated
2018-03-07T19:31:45+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 IEEE 802.11: associated (aid 2)
2018-03-07T19:31:45+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 RADIUS: starting accounting session 4A3347862E7AE01F
2018-03-07T19:31:45+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 WPA: pairwise key handshake completed (RSN)
2018-03-07T20:31:45+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.125 9c:b6:d0:89:4b:d5 
2018-03-07T20:31:45+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.125 9c:b6:d0:89:4b:d5 ARABOOK
2018-03-07T19:31:45+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 00010001222378479cb6d0894bd5 on br-lan: ok fdb8:3854:194d::340/128 
2018-03-07T20:31:46+01:00 warning odhcpd[]: Last message 'DHCPV6 SOLICIT IA_NA' repeated 1 times, supressed by syslog-ng on turris
2018-03-07T19:31:46+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 00010001222378479cb6d0894bd5 on br-lan: ok fdb8:3854:194d::340/128 
2018-03-07T20:31:47+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T19:32:01+01:00 info cron[18472]: (root) CMD (nethist_stats.lua)
2018-03-07T19:32:01+01:00 info cron[18473]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:32:42+01:00 warning []: Missing message-id in rpc-reply.
2018-03-07T19:33:01+01:00 info cron[19224]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:33:49+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 WPA: group key handshake completed (RSN)
2018-03-07T19:33:49+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 WPA: group key handshake completed (RSN)
2018-03-07T19:33:56+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: deauthenticated due to local deauth request
2018-03-07T19:34:01+01:00 info cron[19882]: (root) CMD (nethist_stats.lua)
2018-03-07T19:34:01+01:00 info cron[19883]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:35:01+01:00 info cron[20551]: (root) CMD (   /usr/bin/notifier)
2018-03-07T19:35:01+01:00 info cron[20552]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T19:35:01+01:00 info cron[20553]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:35:07+01:00 warning watchdog[]: Restarted resolver
2018-03-07T19:35:07+01:00 warning watchdog[]: Restarted nethist
2018-03-07T19:36:01+01:00 warning []: Unable to use //tmp//yin2yang.xsl (No such file or directory).
2018-03-07T19:36:01+01:00 warning []: YANG format data models will not be available via get-schema.
2018-03-07T19:36:01+01:00 warning []: Unable to get tty (Not a tty) to get the client's hostname (session 21350).
2018-03-07T19:36:01+01:00 info cron[21354]: (root) CMD (nethist_stats.lua)
2018-03-07T19:36:01+01:00 info cron[21355]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:37:01+01:00 info cron[22065]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:37:06+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: authenticated
2018-03-07T19:37:06+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: associated (aid 1)
2018-03-07T19:37:06+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 RADIUS: starting accounting session C4EDF53E2CE2EC83
2018-03-07T19:37:06+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 WPA: pairwise key handshake completed (RSN)
2018-03-07T20:37:08+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 
2018-03-07T20:37:08+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 WILDMAC
2018-03-07T19:38:01+01:00 info cron[22650]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:38:01+01:00 info cron[22649]: (root) CMD (nethist_stats.lua)
2018-03-07T19:38:14+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: disassociated
2018-03-07T19:38:15+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
2018-03-07T19:38:28+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: authenticated
2018-03-07T19:38:28+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 IEEE 802.11: associated (aid 1)
2018-03-07T19:38:28+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 RADIUS: starting accounting session 654C38D63265D411
2018-03-07T19:38:28+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 WPA: pairwise key handshake completed (RSN)
2018-03-07T20:38:28+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.78 f0:7b:cb:36:2b:38 
2018-03-07T20:38:28+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.78 f0:7b:cb:36:2b:38 D4CHSTOCK
2018-03-07T19:38:28+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T20:38:28+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T19:38:28+01:00 warning odhcpd[1991]: DHCPV6 SOLICIT IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T19:38:29+01:00 warning odhcpd[1991]: DHCPV6 REQUEST IA_NA from 000100011d4efe9eb8ac6f59f176 on br-lan: ok fdb8:3854:194d::81d/128 
2018-03-07T20:38:29+01:00 info dnsmasq-dhcp[4863]: read /etc/ethers - 0 addresses
2018-03-07T19:39:01+01:00 info cron[23174]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:40:01+01:00 info cron[23758]: (root) CMD (   /usr/bin/notifier)
2018-03-07T19:40:01+01:00 info cron[23761]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:40:01+01:00 info cron[23760]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T19:40:01+01:00 info cron[23762]: (root) CMD (nethist_stats.lua)
2018-03-07T19:41:01+01:00 info cron[24497]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:42:01+01:00 info cron[25175]: (root) CMD (nethist_stats.lua)
2018-03-07T19:42:01+01:00 info cron[25176]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:43:01+01:00 info cron[25887]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:43:49+01:00 info hostapd[]: wlan0: STA f0:7b:cb:36:2b:38 WPA: group key handshake completed (RSN)
2018-03-07T19:43:49+01:00 info hostapd[]: wlan0: STA 9c:b6:d0:89:4b:d5 WPA: group key handshake completed (RSN)
2018-03-07T19:43:56+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: deauthenticated due to local deauth request
2018-03-07T19:44:01+01:00 info cron[26565]: (root) CMD (nethist_stats.lua)
2018-03-07T19:44:01+01:00 info cron[26566]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:45:01+01:00 info cron[27279]: (root) CMD (   /usr/bin/notifier)
2018-03-07T19:45:01+01:00 info cron[27278]: (root) CMD (/usr/bin/watchdog.sh)
2018-03-07T19:45:01+01:00 info cron[27280]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:45:07+01:00 warning watchdog[]: Restarted resolver
2018-03-07T19:45:07+01:00 warning watchdog[]: Restarted nethist
2018-03-07T19:45:10+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: authenticated
2018-03-07T19:45:10+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 IEEE 802.11: associated (aid 1)
2018-03-07T19:45:10+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 RADIUS: starting accounting session BC785511ADB476D1
2018-03-07T19:45:10+01:00 info hostapd[]: wlan1: STA b8:e8:56:3d:3f:c6 WPA: pairwise key handshake completed (RSN)
2018-03-07T20:45:12+01:00 info dnsmasq-dhcp[4863]: DHCPREQUEST(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 
2018-03-07T20:45:12+01:00 info dnsmasq-dhcp[4863]: DHCPACK(br-lan) 192.168.100.54 b8:e8:56:3d:3f:c6 WILDMAC
2018-03-07T19:46:01+01:00 info cron[28082]: (root) CMD (nethist_stats.lua)
2018-03-07T19:46:01+01:00 info cron[28083]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:47:01+01:00 info cron[28761]: (root) CMD (/usr/bin/rainbow_button_sync.sh)
2018-03-07T19:47:47+01:00 warning []: Unable to use //tmp//yin2yang.xsl (No such file or directory).
2018-03-07T19:47:47+01:00 warning []: YANG format data models will not be available via get-schema.
2018-03-07T19:47:47+01:00 warning []: Unable to get tty (Not a tty) to get the client's hostname (session 29302).
2018-03-07T19:48:01+01:00 info cron[29474]: (root) CMD (nethist_stats.lua)
2018-03-07T19:48:01+01:00 info cron[29475]: (root) CMD (/usr/bin/rainbow_button_sync.sh)

Hello,
sometimes you need reboot your modem and it should work.

On DOCSIS/cable networks it is quite common that you will only get an address via DHCP in a relative short time window after the DOCSIS booted up, so I follow @Pepe’s advise and try rebooting the modem…

I’ve reset it a couple of times yesterday. But I’ll do it again tonight specifically after everything is set up. The Modem deactivates Wi-Fi automatically in Modem-Mode so there shouldn’t be any issue of another devices grabbing the WAN-IP. The only activity on WAN port I get is a couple of traffic indicator flashes on the LAN port connection of the ISP-issued modem/router. That probably means it the ports aren’t physically damaged. I’ll try again tonight.

Just to be sure though. There isn’t any need to change between the SFP connector and the Ethernet WAN port in software right? They are both on interface eth1 I think so both are active at the same time right. The guy I bought the router from was using it with the SFP connector.

Oh btw, thanks for the quick replies guys.

I did reset it a couple of times. Called Support again and they told me no external IP is being assigned. Tried with the laptop and it connected instantly. It should be something on the WAN interface of the Turris. People in the UPC forum seem to think the log files mention nothing about ipv4 (only ipv6). As the ISP connection only works with ipv4 in modem-mode that might be an issue. Just to test I set activated “broadcaster flag” in the WAN-interface settings. Apparently that’s sometimes necessary for DOCSIS3. No luck. I also tried to deactivate all things ipv6. No luck so far. There is simply no signal to the wan port. I’ll try to replicate stuff again tonight and post more log files if that helps.

Probably doesn’t help (and in german) but here is the thread I opened in the UPC community forum

Hello,
without successful going through Wizard setup you won’t have working connection.

I’d try this:

Update your Turris router to the latest version, which is 3.9.6.

Do it this way:
First, you need to turn on Router mode in the provided modem, which is Connect Box (Compal) and now wizard in step 8 you need to change Router IP address to something like 192.168.2.1, it needs to be different than 192.168.1.1. So now you have double NAT, but in case it’s OK, because you will get change it back.
I need to be sure that WAN port is working and the router is able to update itself to the latest version.

In log which you provided I can see that you have plugged cable to WAN port, which is correct, but I’d try different ethernet cable if it is possible.

If it works and you have it working in router mode, let’s try to change Compal to Bridge mode, because you don’t need double NAT and then you can change router IP address in Foris to 192.168.1.1.
You should have access your modem, which should be available on IP address 192.168.100.1

If it doesn’t work, you can re-flash your router with the latest version, but as I said this should work out of a box. At least you will have in the factory image newer image, when you have IPv4 from UPC and you don’t have DS-LITE IPv6.

Later:
As I have personal experience with UPC CZ DNS servers it’s better to uncheck DNS forwarding in Foris

EDIT: I’ve been an idiot :slight_smile: The SFP module was inserted the entire time. Didn’t realize that would stop the RJ45 wan port from working. I have a connection now. Will report back soon. Thanks for all your help.

Right. So I’m beginning to suspect the WAN port might be broken. I set the Connect Box to router mode and connected it to the WAN port (Using 192.168.2.1). No luck. No signal at all. It doesn’t show up as a connected device on the connect box. Also no indicator of traffic either on the lan port (connect box) or the front panel of the Turris. I texted the previous owner to see if he ever experienced any issues with it.

Just out of interest. What’s the wan6 interface exactly. Does it have something to do with SFP or ipv6?

after 4 days of use, everything works fine. Still having some problems Setting up graphs properly. Next step will be dns based ad blocking. either through an lxc container running Ubuntu with pi-hole or some native method. Also need to get my head around openvpn. Thanks for all your help.